Cal670 Posted November 5, 2018 Report Share Posted November 5, 2018 Oil and filter from Euro Car Parts. Usually go for Fuchs Titan but trying Shell Helix this year since it was cheaper with the discount code. Link to comment Share on other sites More sharing options...
Akuma77 Posted November 5, 2018 Report Share Posted November 5, 2018 54 minutes ago, Cal670 said: Oil and filter from Euro Car Parts. Usually go for Fuchs Titan but trying Shell Helix this year since it was cheaper with the discount code. thats good mate did my oil change yesterday and managed to get all my stuff for just under £32 Link to comment Share on other sites More sharing options...
Crazy Cat Lady Posted November 20, 2018 Report Share Posted November 20, 2018 (edited) My recently installed 20 year old Kenwood Radio/cassette player has alas malfunctioned; tape player is kaput I never did get it to play right, pitch instability was too noticeable, cleaning the pinch rollers and head didn't do the job hoped for, and after trying to ween the thing back to life the tape player suddenly croaked completely. It was a sad moment However, all is not lost, today a brand spanking new [albeit discontinued] replacement head unit arrived here from caraudiodirect uk! I have decided to go back to CDs again, have lots of new CD music to plug in and play can't hardly wait The Alpine CDE W296BT benefits from an FM tuner, lots of colour panel options, and no fewer than 9 parametric bands of frequency control - should hep tune it in to the acoustic abilities of the Alpine speakers already fitted in and waiting, and the CD player should be no slouch either Edited November 20, 2018 by Crazy Cat Lady 1 Link to comment Share on other sites More sharing options...
CheltGirl Posted November 21, 2018 Report Share Posted November 21, 2018 My 25 yr old HT lead finally sheared off beyond repair and the car came to an unexpected halt. Today my replacement Magnecor competition leads arrived! Great service from Magnecor, even though ordered from a third party (DC Performance) on Monday evening, made at Magnecor yesterday, with me today (Wed). Even a little note inside to say my leads were handmade by Carol 3 Link to comment Share on other sites More sharing options...
Crazy Cat Lady Posted November 21, 2018 Report Share Posted November 21, 2018 3 hours ago, CheltGirl said: ...a little note inside to say my leads were handmade by Carol Girl Power! Link to comment Share on other sites More sharing options...
CheltGirl Posted November 21, 2018 Report Share Posted November 21, 2018 Another parcel has now arrived - dizzy cap, rotor arm and ignition coil to go with the HT leads. Can't wait to get them all fitted now! 1 Link to comment Share on other sites More sharing options...
jim7564 Posted November 22, 2018 Report Share Posted November 22, 2018 18 hours ago, CheltGirl said: Another parcel has now arrived - dizzy cap, rotor arm and ignition coil to go with the HT leads. Can't wait to get them all fitted now! interested to see if you notice any improvement with these bits and the leads.mine are still original leads although the dizzy cap rotor have been done. got these 1 Link to comment Share on other sites More sharing options...
Middz3675 Posted December 19, 2018 Report Share Posted December 19, 2018 This came in post today, 7.99 from amazon. Couldnt wait till it was dark lol was like a little kid 1 Link to comment Share on other sites More sharing options...
Middz3675 Posted December 22, 2018 Report Share Posted December 22, 2018 Today in the post my numberplates arrived. Only ordered them yesterday so we’ll chuffed. My mtec bulbs for headlights and my blue bulbs for dash. Going to be a busy boy today 1 Link to comment Share on other sites More sharing options...
Tomb Posted January 3, 2019 Report Share Posted January 3, 2019 My S/C 1 Link to comment Share on other sites More sharing options...
Cal670 Posted January 19, 2019 Report Share Posted January 19, 2019 Rear brake pads from Apec. Weather would turn now wouldn't it? 1 Link to comment Share on other sites More sharing options...
Middz3675 Posted February 9, 2019 Report Share Posted February 9, 2019 My jdm numberplate backing!!! Yippee!! Now I all have to do is put it on Link to comment Share on other sites More sharing options...
Middz3675 Posted February 9, 2019 Report Share Posted February 9, 2019 Well chuffed with it 5 Link to comment Share on other sites More sharing options...
Nicola67 Posted February 12, 2019 Report Share Posted February 12, 2019 2 replica holder's for my A pillar map light 1 Link to comment Share on other sites More sharing options...
alwayzsidewayz Posted February 12, 2019 Report Share Posted February 12, 2019 Look great them mate, pic of it fitted now please!! Link to comment Share on other sites More sharing options...
dublet Posted February 12, 2019 Report Share Posted February 12, 2019 (edited) An NVIDIA 2070. Spent the last two days trying to update Windows 10 to a point where I can even install the sodding drivers. Edited February 12, 2019 by dublet Link to comment Share on other sites More sharing options...
Beeva Posted February 12, 2019 Report Share Posted February 12, 2019 one of the best accessories for my Celicas…...my 2019 CCUK membership card 1 Link to comment Share on other sites More sharing options...
Akuma77 Posted April 10, 2019 Report Share Posted April 10, 2019 3rd set of mtec dipped bulbs , the last pair have lasted over 3 years so i bought another set haha Link to comment Share on other sites More sharing options...
Xanadu Posted April 11, 2019 Report Share Posted April 11, 2019 Gates Power Grip Kit - K015194XS. eBay - £50.00 Should have bought this 20,000 miles ago. Link to comment Share on other sites More sharing options...
Sheeple Posted April 13, 2019 Report Share Posted April 13, 2019 Both prob shaft bearings, some nuts to hold them to the shaft and a left rear radius arm.. Link to comment Share on other sites More sharing options...
Recommended Posts