myimportedbeast Posted August 27, 2013 Report Share Posted August 27, 2013 Ok here's my other as I cudnt find if someone had started it...again which parts are swappable between the above gens and an almost straight swap. Link to comment Share on other sites More sharing options...
dublet Posted August 27, 2013 Report Share Posted August 27, 2013 Engine. Link to comment Share on other sites More sharing options...
Briano Posted August 27, 2013 Report Share Posted August 27, 2013 Nothing really unless your engine swapping Link to comment Share on other sites More sharing options...
digs Posted August 27, 2013 Report Share Posted August 27, 2013 3SFE and the 2nd gen 3sgte have bits you can swap (oil sump, exhaust manifold, brakes) Link to comment Share on other sites More sharing options...
Biggy Posted August 27, 2013 Report Share Posted August 27, 2013 steering wheels?? Link to comment Share on other sites More sharing options...
Ghoulie Posted August 27, 2013 Report Share Posted August 27, 2013 Alloys Link to comment Share on other sites More sharing options...
princy Posted August 27, 2013 Report Share Posted August 27, 2013 Some of the suspension components are a straight swap Link to comment Share on other sites More sharing options...
si_c Posted August 27, 2013 Report Share Posted August 27, 2013 Alloys Ah ha! I was right! bad ghouly Link to comment Share on other sites More sharing options...
Limeymk1 Posted August 27, 2013 Report Share Posted August 27, 2013 My old widebody gen 5 had twin pot calipers and 274 discs, same as my gen 6 (I think). Link to comment Share on other sites More sharing options...
Biggy Posted August 27, 2013 Report Share Posted August 27, 2013 My old widebody gen 5 had twin pot calipers and 274 discs, same as my gen 6 (I think). I think the gen 5 twin pots have smaller pistons than the gen 6 twin pots... Link to comment Share on other sites More sharing options...
princy Posted August 27, 2013 Report Share Posted August 27, 2013 I think the gen 5 twin pots have smaller pistons than the gen 6 twin pots... They do, they're the same as the 165 calipers Link to comment Share on other sites More sharing options...
cooperman Posted August 28, 2013 Report Share Posted August 28, 2013 i will say it then. every one knows any way but for the record the rear strut brace from the gen 6 fits the gen 5. apart from that any thing else can be made to fit (ask princy ) Link to comment Share on other sites More sharing options...
Recommended Posts