Jump to content

Does a gen 5 bonnet fit in a gen 6 ?


arizona

Recommended Posts

it doesnt , the 5 has a bit of metal the 6 doesnt have , the bit inbetween the headlights , because of this it doesnt go , a 6 goes into a 6 ( just ) , a 5 cant go into a 6 , a 5 cant go into a 5

when i collected the cs bonnet in my beams i dropped in onto the open boot aperture , couple of pillows then tied the boot lid down onto the bonnet , noisey but did the job

Link to comment
Share on other sites

I've had a bit of a search as i'm sure i've seen this question come up before but i need to pick up my gen 5 bonnet, if it will go in a 6 it makes life easier

Anyone done it?

:)

I am in surrey might be able to get it in the van dependant on where it is

Link to comment
Share on other sites

I am in surrey might be able to get it in the van dependant on where it is

Hi

Its a bit of a trek its at Bigb1970s' place in Braintree but we have a gen 6 here so we should be ok with either tying the boot down or putting it on the roof and strapping it well (i just have to convince the other half it wont hurt his new car :lol: ) but thanks for the possible offer there, its Braintree to Godstone so a bit of a pita unless you had anything planned already that way.

Thanks to ttech,izzzzythedog and rpsmith - looks like we'll be able to get it on or part in which is fine

And in that moment of inspiration you get on waking sometimes - why did i not think, i have only to undo 4 bolts to try the new bonnet off the 5 into the 6 doh :doh::D

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.