shelby-65 Posted 4 July 2024 Report Posted 4 July 2024 (edited) Are you able to replace the very top part of the strut which sits firmly into the ball joint? While removing this off the car, the nut had rounded which meant it had to be cut off using an angle grinder by my mechanic. There wasn't room to simply cut the nut/ball joint with the strut still in place. The fixings will obviously be replaced with new parts but am hoping to save my original struts to maintain the originality of the car. Thanks. Edited 4 July 2024 by shelby-65
Jim881 Posted 4 July 2024 Report Posted 4 July 2024 Not gonna lie mate, I would just buy new ones. https://www.ebay.co.uk/itm/165076809181?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WapsIZ-PRYy&sssrc=4429486&ssuid=2gTQjafTRh2&var=&widget_ver=artemis&media=COPY
ams Posted 5 July 2024 Report Posted 5 July 2024 They are in with thread lock, if you heat them up first they will come out with a good spanner without rounding Most new struts come with the ball anyway
shelby-65 Posted 5 July 2024 Author Report Posted 5 July 2024 25 minutes ago, ams said: They are in with thread lock, if you heat them up first they will come out with a good spanner without rounding Most new struts come with the ball anyway Thanks Ams - I'm aware of the blue thread lock on the bolt, but I'm asking specifically about the very top part of the strut which has now been cannibalised (which fits on to the ball) - can this black part be replaced? Otherwise, I'll have to buy new. Cheers mate.
Recommended Posts