ESTHAR_CITY Posted October 10, 2014 Report Share Posted October 10, 2014 Any one got the gear and the knowledge to help me install four poly engine mounts on my gen 7 Celica, I'll pay an even go for a drive to where ever needed? Thanks Link to comment Share on other sites More sharing options...
Booth Posted October 10, 2014 Report Share Posted October 10, 2014 Really... Its easy dude. Just remove the undertrays, stick a jack under the gearbox to hold the engine. Undo the mounts and change them over. 1 Link to comment Share on other sites More sharing options...
ams Posted October 10, 2014 Report Share Posted October 10, 2014 Back one can be a bit more tricky Link to comment Share on other sites More sharing options...
ESTHAR_CITY Posted October 10, 2014 Author Report Share Posted October 10, 2014 I dont even poses a jack.....hard times. My local garage is like nope cant do them and AP tuning want £130 Link to comment Share on other sites More sharing options...
Booth Posted October 11, 2014 Report Share Posted October 11, 2014 Ah not good dude Link to comment Share on other sites More sharing options...
sh3p Posted October 11, 2014 Report Share Posted October 11, 2014 will happily do it for you if your prepared for a 100+ mile drive? post code dn333bd would have to be on 1 of my 4 days off as i work a 4 on 4 off 12hr 6-6 days/nights 1 Link to comment Share on other sites More sharing options...
ESTHAR_CITY Posted October 11, 2014 Author Report Share Posted October 11, 2014 will happily do it for you if your prepared for a 100+ mile drive? post code dn333bd would have to be on 1 of my 4 days off as i work a 4 on 4 off 12hr 6-6 days/nights thanks mate, but might be a bit far, thanks again Link to comment Share on other sites More sharing options...
sh3p Posted October 11, 2014 Report Share Posted October 11, 2014 figured it would be but you never know where peeps plan on travelling in the near future:) Link to comment Share on other sites More sharing options...
Bully0712 Posted October 12, 2014 Report Share Posted October 12, 2014 (edited) I can help you if you need a hand mate :) Edited October 12, 2014 by Bully0712 Link to comment Share on other sites More sharing options...
geraintthomas Posted October 12, 2014 Report Share Posted October 12, 2014 Halfords do a proper 2 tonne jack, two axle stands, wheel chocks, wheel brace, and a rolling flat bed for £50 for the lot. Definitely worth looking into especially if you don't own a jack! Link to comment Share on other sites More sharing options...
Recommended Posts