Tony47 Posted February 22, 2013 Report Share Posted February 22, 2013 Bought Myk,s old t sport wheels which are currently been refurb end and powder coated, I would like some new wheel nuts to go with them.... Think I read on here somewhere that I need std MrT nuts as they are MrT wheels so can't use aftermarket nuts.......... Is this correct. ????????? Thanx Link to comment Share on other sites More sharing options...
Kev 16v Posted February 22, 2013 Report Share Posted February 22, 2013 It is Link to comment Share on other sites More sharing options...
Tony47 Posted February 22, 2013 Author Report Share Posted February 22, 2013 So is that a trip to MrT then or will breakers have a good set......? Link to comment Share on other sites More sharing options...
Kev 16v Posted February 22, 2013 Report Share Posted February 22, 2013 ams is your man Link to comment Share on other sites More sharing options...
Cravo Posted February 22, 2013 Report Share Posted February 22, 2013 Mr T would pull your pants down mate IF they had them in stock. I think these are the correct ones, Kev might be able to confirm or deny http://www.ebay.co.uk/itm/4-x-M12X1-5-CLOSED-ALLOY-WHEEL-NUT-NUTS-/300786300900?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&fits=Model%3ACelica&hash=item460842b7e4 Link to comment Share on other sites More sharing options...
Kev 16v Posted February 22, 2013 Report Share Posted February 22, 2013 (edited) Mr T would pull your pants down mate IF they had them in stock. I think these are the correct ones, Kev might be able to confirm or deny http://www.ebay.co.u...=item460842b7e4 Oh dear, Darryl. Are you guilty of not reading the full thread?. This is the type Tony will need..http://www.ebay.co.uk/itm/TOYOTA-VVTI-CELICA-7gen-wheel-nut-bolt-/181039315560?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a26c8ba68 Edited February 22, 2013 by Kev 16v Link to comment Share on other sites More sharing options...
Cravo Posted February 22, 2013 Report Share Posted February 22, 2013 Nah I read it I am sure I used these on my 140 though when I swapped the 16's for the dynamic 17's but I might be wrong Link to comment Share on other sites More sharing options...
Steve74 Posted February 22, 2013 Report Share Posted February 22, 2013 I have a spare 16 of them but you will need to buy some locking wheel nuts tho Link to comment Share on other sites More sharing options...
Kev 16v Posted February 22, 2013 Report Share Posted February 22, 2013 Nah I read it I am sure I used these on my 140 though when I swapped the 16's for the dynamic 17's but I might be wrong The pre face lift "Dynamic" rims were the only non Fondmetal type used on the Gen 7. As such you may well be right in saying they take a 60 degree tapered nut. Steve to the rescue again Link to comment Share on other sites More sharing options...
Cravo Posted February 22, 2013 Report Share Posted February 22, 2013 Ah right, yea that makes sense I liked those wheels quite a lot actually, still do. Link to comment Share on other sites More sharing options...
Kev 16v Posted February 22, 2013 Report Share Posted February 22, 2013 Ah right, yea that makes sense I liked those wheels quite a lot actually, still do. Yep, they were sweet. Probably discontinued due to warranty claims on the lacquered finish though Link to comment Share on other sites More sharing options...
freddie0 Posted February 22, 2013 Report Share Posted February 22, 2013 As it happens I may be able to help out with a set of lockers that I liberated off my old 140 before it went off to be traded. Can check when I get home tonight. Genuine Toyota ones, not sure how much they go for usually? Like gold dust aren't they?? Link to comment Share on other sites More sharing options...
ams Posted February 22, 2013 Report Share Posted February 22, 2013 The standard gen6 GT wheels use the same nut - think they stick out a bit longer but are suitable - post a pic of the nuts you have on there - they should like the ones kev posted Link to comment Share on other sites More sharing options...
Briano Posted February 22, 2013 Report Share Posted February 22, 2013 What ams says Link to comment Share on other sites More sharing options...
Tony47 Posted February 22, 2013 Author Report Share Posted February 22, 2013 (edited) Lol, im still confused to which ones i need then, would like new ones to go with nice fresh rims, so which ebay ones is it or can someone supply a very good used set,( i have locking ones from my old GT in the garage)..... thanQ the nuts i have on at the moment are flat as the wheels are from a Suburu.. Edited February 22, 2013 by Tony47 Link to comment Share on other sites More sharing options...
ams Posted February 22, 2013 Report Share Posted February 22, 2013 (edited) This is the type Tony will need..http://www.ebay.co.uk/itm/TOYOTA-VVTI-CELICA-7gen-wheel-nut-bolt-/181039315560?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a26c8ba68 If you need them then I have 16 at 65p each plus £4 post - but check that you dont have your old gt ones first Edited February 22, 2013 by ams Link to comment Share on other sites More sharing options...
Tony47 Posted February 22, 2013 Author Report Share Posted February 22, 2013 Sorted with Ams, thanx for the replies gents....... Link to comment Share on other sites More sharing options...
Adam_L Posted February 22, 2013 Report Share Posted February 22, 2013 Nah I read it I am sure I used these on my 140 though when I swapped the 16's for the dynamic 17's but I might be wrong Your right the dynamics do use aftermarket style tapered nuts just to confuse matters. Link to comment Share on other sites More sharing options...
Recommended Posts