Jump to content

cs2000

Lapsed Club Members
  • Posts

    1,405
  • Joined

  • Last visited

Everything posted by cs2000

  1. Happy 5 Anniversary cs2000!

  2. Happy Anniversary cs2000!

  3. Happy Anniversary cs2000!

  4. there are large roll printers out there that just take vinyl sheet froma roll and print onto it. If Mook has one of those i dont see why not. Theyre basically like your desktop inkjet printer supersized.
  5. HID's will be fine after Jan. Take a read of the MOT regs. IF the car has self levelers they must work, IF not, it isnt a reason to fail according to the manual. Even with HID's
  6. The reason i used so much was i bled 250ML off of each caliper as i changed fluid grade's and wanted to make sure it was properly flushed through first. The ofcourse there is spillage, which for me was a lot! lol
  7. I stuck some in the other day. used 1/4 of a tank so far. i gave it a double combo, running it wth a tank of vpower. Seems to help, car feels less resistant especially when cold.
  8. Most likely something to do with the new relay. I have bypassed that route and used load resistors (these are like normal resistors but with a major heatsink on it) and my bulbs behave well.
  9. Also just ordered a bottle, may aswell
  10. Those trico blades are the best aero adds I have ever had . Theyre not expensive and lasted me just over a year which no blade since has even gotten lose too!
  11. I like that meg's bag. I use a HP printer bag (is a material one), and on the topic of micrfibres, my bag is half chemicals, half microfibres!
  12. I have fited mine the same as above, inside the headlight. With a heat gun getting them apart is pretty easy, its putting them back together and making sure theyre 100% sealed thats the difficult part! I have passed plenty of police, anbd even with my exhaust, they never offer to stop me
  13. wow, very sad. Its smased up almost beyond recognition
  14. Spoke to him about this a month orso ago at Woodbridge TSS. He said for the money he wants for it, he expects it to be sold abroad, dubai, that kinda place.
  15. I had a 206GTI with half leather seats, still melts the skin on your arms when you sit in them in summer if you catch them on the seat bolsters! Winter isnt too bad but heat! Owch!!!
  16. Those pioppers are pretty fiddly, the hole hardly ever lines up properly, just pop the centre pin 100% out, then you can see down tghe middle of the popper if its in the hole or not.Id use some propper grease, thats whats on those runners from the factory, ive got it on my hands a few times.
  17. Ive replaced the plug itself, but never replaced the washer.
  18. ^^ will help me aswell. Now just need to find a way to get rid of superglue on headlights and il be sorted lol.
  19. Really! my area was fairly nice though. prob wouldnt have done the job, in any car, if it was a rough area.
  20. A guy at dominos used to buy bangers from auctions. Run them till the tax or MOT ran out, then either sell them private or scrap them. He always seemed to make money cos he'd always buy diesels or little 1.2's
  21. most places pay £5.80 - £6 per hour with mileage ontop of that. In my experience, mileage money doesnt cover petrol. nevermind tyres, and other things like brakes and wear and tear on engine. AMS, thanksa for that. mines on 118k miles and am always worries about something going bang, even though its well looked after. Just never had a car with this mileage on it. Anyways. As i said, in my personal experience doing that job with this car, it IS possible. Just not too practical in the long term when other guys will be using fiestas and fiat's and such and making money on the mileage rate. But, if your short on money, take it, you just cant turn down a job, and it will get you by until you can find a propper job.
  22. Never had issues getting mine off of my 53 plate. Dont have any undertrays on either. Only thing i did was when i first bought the car i did an oil change and replaced the bolt with one of those magnetic ones, been using that ever since, always comes off no trouble.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.