3241AJONES Posted July 24, 2015 Report Share Posted July 24, 2015 I'm having problems with my Gen 6 TVSS IIIB alarm does anyone know how to totally disable it until i get a new one fitted. Cheers . Link to comment Share on other sites More sharing options...
BenMMellor Posted July 24, 2015 Report Share Posted July 24, 2015 What's the problem? Link to comment Share on other sites More sharing options...
3241AJONES Posted July 24, 2015 Author Report Share Posted July 24, 2015 I'ts been off the road for two months and the battery was dead , so charged it up and on reconnecting the battery all the right hand side indicators were stuck on even with the ignition turned off . If i take the fuse for the hazard lights out the indicators work fine but obviously no hazard lights . It all seems to be connected to the alarm as the remote fob stops working and the ( doors open icon ) flashes on and off . I was getting a new alarm as the siren had stopped working and only one fob for it . Link to comment Share on other sites More sharing options...
SKINY Posted July 24, 2015 Report Share Posted July 24, 2015 pull it out and simply unplug the unit, its in behind/above the radio. Link to comment Share on other sites More sharing options...
3241AJONES Posted July 25, 2015 Author Report Share Posted July 25, 2015 Cheers. I didn't want to unplug anything incase it it affected the immobiliser , but will try and see what happens. Link to comment Share on other sites More sharing options...
3241AJONES Posted July 27, 2015 Author Report Share Posted July 27, 2015 Unplugged alarm from behind radio / air vents and everything ok now until i get a new alarm system fitted . Link to comment Share on other sites More sharing options...
Recommended Posts