Cravo Posted January 21, 2013 Report Share Posted January 21, 2013 Anyone got any links to a decent paint stripper. I am going to take the paint off my old centre console and see what it looks like underneath before I scrap it as it was a facelift one. Link to comment Share on other sites More sharing options...
ams Posted January 21, 2013 Report Share Posted January 21, 2013 starchem - might take the colour off the console as well though mate Link to comment Share on other sites More sharing options...
Cravo Posted January 21, 2013 Author Report Share Posted January 21, 2013 ah right cheers matey, I think if i can get the first lot of laquer and paint off I might be able to remove the rest myself as there are about 5 layers under there haha. Primer, original purple, primer again, more purple, laquer! Link to comment Share on other sites More sharing options...
BenMMellor Posted January 21, 2013 Report Share Posted January 21, 2013 be wary as the wrong stripper will essentially just melt the plastic - i did that a few years ago when I did my Gen6 plastics If it not worh just doing a good sanding back with wet and dry then priming for a new colour? Link to comment Share on other sites More sharing options...
Cravo Posted January 21, 2013 Author Report Share Posted January 21, 2013 I would mate but I did that before and it all bubbled up haha. I am thinking of just wrapping it but I also like the thought of Decuma grey metallic Link to comment Share on other sites More sharing options...
Recommended Posts