shadow750 Posted March 21, 2011 Report Share Posted March 21, 2011 (edited) I have just bought these for the GT4. A lot cheaper than buying ready made. Only £30.66 for 1.mtr with free post. . Yoy will find most rad in and outlet hoses are 32mm Edited March 21, 2011 by shadow750 Link to comment Share on other sites More sharing options...
izzzzythedog Posted March 22, 2011 Report Share Posted March 22, 2011 ohhhhhhhhh me likey a lot , do you have a link ? Link to comment Share on other sites More sharing options...
yellowchinaman Posted March 22, 2011 Report Share Posted March 22, 2011 I hope you're not using those for your "water" in/outlet for the rad? These are for covering "wire" and not designed to allow hot water under pressure. Link to comment Share on other sites More sharing options...
Giz Posted March 22, 2011 Report Share Posted March 22, 2011 32mm will not be for covering wire???? :rolleyes: Link to comment Share on other sites More sharing options...
CW Racing Posted March 22, 2011 Report Share Posted March 22, 2011 Not good for rads. Link to comment Share on other sites More sharing options...
izzzzythedog Posted March 22, 2011 Report Share Posted March 22, 2011 i would have thought these are for water or liquids ? normally as you guys know its nylon renforced , im hoping this is both nylon and wire to create more flexability , i have an angle issue on mine Link to comment Share on other sites More sharing options...
carlasumm Posted March 22, 2011 Report Share Posted March 22, 2011 (edited) i wanna know where to get them willing to give it a go from what i have just read up on those sort of hoses they should hold up for rads easy Edited March 22, 2011 by carlasumm Link to comment Share on other sites More sharing options...
cs2000 Posted March 23, 2011 Report Share Posted March 23, 2011 They look like the hoses we sell at work for ponds. As they are silicone rather than plastic they should hold up to temps and pressure depending on the thickness of the silicone obviously... Link to comment Share on other sites More sharing options...
Alan Clogwyn Posted March 24, 2011 Report Share Posted March 24, 2011 We used to use big versions of these for air pipes on air cooled Lister diesels, they didnt last long. Link to comment Share on other sites More sharing options...
Recommended Posts