crewcutchuck

Yep i cleaned mine mate....I'm just shocked that there is paint on yours How did you get it to behave?

Had a bit of a clean up so much cleaner than it was this time last year. What you think?

The fit is not quite right for MY st202 but it is apparently spot on for the st205 (which is what its made for)

There is enough scoobys doing twat laps around Norwich on a sat night to do that. On a more serious note - good work

Bet whoever did that thought they were big and cleaver when they did it. Lets just hope someone does it to there head for them one day

posted at same time.

Sorry but I really like that

About 34mpg with the beams and about 32mpg with the rev3 3sge. About 70/30 b-roads/city Oh and about 48mpg in the 3cyl 1L corsa!

Looks like a nice car although +1 on the wheels being a bit yuk. How do you feel it compairs with your 7 driving wise?

I have to say there is something about the Ignis sports that i like too. would have bought one for a run about if i could aford to. Keep it and buy a t-sport for your weekend car

I couldnt find anything on google Just orderd one

I've looked before but never found any seems odd

I know your type!

Can't you just lend me the gear? I'd love a good tig set.

The 40 and 50 will refer to the profile of the tyres and not the width. The width is prob about 205 for those tyres. You risked your licence by driving back with four knackerd tyres?

Yea I was wrong! Feel free it whip me...please I blame it on the beer. I'm a machinist trained by a toolmaker and currently work as a mechanical and electrical engineer BTW. I don't drink at work tho

Ok. Too many beers. I recon about 12mm in total dif between PCD. But in answer to the original question yes they are multifit through movable washers.

Nah, there's more than that. Could print the pic off and scale it from a 12.5mm hole. But I doubt anyone cares that much lol Another edit: I just expanded the pic on my iPhone so the hole measured 12.5mm on a steel ruel. 6mm offset!

Thinking about it again. If each washer is 5mm offset. that's 10mm over 180deg rotation for each washer. Therefor over two washers that's 20mm! So its possible. Edit: the bit about the offset being 5mm is crap. I mean the dif is 5mm over the 180degree rotation therefor ofset from center would be 2.5mm. I will think before I type I will think before I type I will think before I type I will think before I type ....ect

Each one only needs to move half the change in PCD and if they are 12mm+ holes then I can believe they are 5-6pm offset looking at that pic. Still wouldn't find em on my car tho. (or any TSW wheels for that matter) Edit: just saw that he's claiming 100-120. Sorry

http://cgi.ebay.co.uk/4x-17%22-Tsw-Ludica-...#ht_9922wt_1084 Look at the pic of the back of the wheel

It would be possible if there were eccentric holes in five inserts that you could rotate to different positions.

Photobucket Yellow just seemed to work best.

Another quick play on photobucket Any thoughts?

As long as your not making the engine labour too much. Its how well the engine burns the fuel that also needs to be taken into account. If your going uphill at 30mph in 5th you might have a lot more throttle on than if you were in 4th. That's what I find when I do my little mpg tests. As long as your not making the engine labour too much. Its how well the engine burns the fuel that also needs to be taken into account. If your going uphill at 30mph in 5th you might have a lot more throttle on than if you were in 4th. That's what I find when I do my little mpg tests.