BigSeed

You're welcome! Glad you enjoyed it. Found [emoji16] ...will subscribe [emoji106] Will check them out, thanks. I've now started my own thread/log of my vids as there will be more, others welcome to post in there. BigSeed's GoPro Videos (and anyone who cares to post [emoji106]) http://www.celica-club.co.uk/forum/index.php?/topic/180795-BigSeed%27s-GoPro-Videos-%28and-anyone-who-cares-to-post-%5Bemoji106%5D%29&share_tid=180795&share_fid=56865&share_type=t

Cool, I still can't find it! Do you happen to know the name of the thread or a link? This is all I see in "Celica chat" (tapatalk)

Sound guys...will repost [emoji15]

Recently got my hands on a GoPro 3+ Long story short, I lent my pal my JVC handycam about 4 yrs ago and never saw it again, borrowed his GoPro the other week as I no longer had a cam...he said I could keep it as he owed me one...RESULT! Like a kid and Christmas I went and bought spare battery and suction car mount. Also realised why he gave it me...there are two tiny, tiny chips on the lens, they catch the light at certain angles so no good for his wedding video business. Good enough for me and a replacement lens is £50 so may invest in the near future. Anyway, thought it would be good to have a thread of vids if anyone else has any? (Couldn't find a a similar thread, apologies if there is one) Post below [emoji106] One to start us off, 5.1 mile stretch...pub to pub [emoji6] BLACK DOG RUN - EVENING https://vimeo.com/180472439 Got another uploading, rear view, no music, will post up later. Biggie.

Few more pieces to the under bonnet puzzle. Just have to decide which to use and where

First few pieces of the engine bay jigsaw. Aluminium for dress panels Carbon vinyl to wrap said panels Rad bracket covers from Kelsports (doing a group buy for the gen 6 slam panels if anyone interested and hasn't seen it) Gen 6 bonnet slam dress panel https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Ecelica-club%2Eco%2Euk%2Fforum%2Findex%2Ephp%3F%2Ftopic%2F180537-Gen-6-bonnet-slam-dress-panel&share_tid=180537&share_fid=56865&share_type=t U-nuts and tappers for the under tray. Just waiting on the rocker cover (either polish up or paint-undecided) and cable tidy bits... in red of course.

Spotted this yesterday on the back of a Nissan note... dig-s made me think of you ha

Can't you use these? I replaced all my originals on my gen6 Search "u nut" on eBay loads of different ones.

Just been stopped by an oldish fella as I was climbing into my car...I could see him eyeing up the motor whilst I was in the local co-op. He was walking from his new A5 as I got in, closed the door and looked up he was standing gesturing to open the door... "Can I just say this is the nicest one I've ever seen, I love my modern classics" Me - "Cheers mate, you've made my day!" "Yes, really, really nice, I can tell you take good care of her" he smiled I grinned, thanked him again and drove off like a Cheshire Cat! Pic for fun

This. Plus black is one of the hardest colours to match apparently. Mines black, needs front and rear bumpers, skirts and o/s rear wing looks like snail has had a field day with a touch up pen...got told that when I went for a quote for re-spray those parts.

All top bolts and clips for Gen6 front bumper...just hope it's dry this weekend! All still available for just under £7 from MrT Also grabbed this whilst there: Should have probably just ordered everything on there bolt-wise

Ha...haven't had chance to use it yet mate..weekend beckons.

Will give it a whirl then [emoji1303] It's not the Glisten but came as a kit, see how it goes.

Magnecor leads, stuck em on at lunchtime [emoji41] Then went for a drive ☀️☀️☀️☀️

Will do buddy, located the wires to splice into last night (blue/yellow & red/white) under dash in drivers footwell. - Door courtesy light [emoji1303]*Edit have noticed the ignition ring won't fit over the barrel without some shaving of the plastic??? Have read this somewhere before I think.

Footwell lights & Ignition ring...these are going red too [emoji35]

Hopefully this will work on the silver roof spoiler. Oh and these came too...in a pair Now for the challenge...get them on the gen6

Continuing with the red accents...Lockwood dials for the SR

http://www.meisterr.co.uk/wp-content/uploads/2013/06/MeisterR-Manual.pdf Will come in handy if you bought second hand.

No worries bud.

I think you would be OK on 0mm, I just don't on mine. Just been having a read of this (I know it's Civics) Principal is the same...BC coilovers have a few vid on YouTube too for setup http://www.civiclife.net/board/topic/86558-how-tight-should-you-make-the-springs-on-meister-r-coilovers/?do=findComment&comment=1037112 Must be posted by Jerrick @MeisterR (member on here also) Fire a pm mate, best to come from the horses mouth.

Yeah mate makes sense. Just that you said you loosened the top locknut so there was "zero preload" and the Spring was loose...you then said you span the damper to raise, did you add the pre-load back to the spring/wind the top nut back up? Just trying to get full picture...Spring looks pretty compressed in your pic compared to mine too, but then I don't know what they were like from the outset. You no pics from when you took delivery to compare?

Could do with seeing the whole coilover to fair but I thought the pre-load (top two nuts) should have stayed where they were and then loosen the bottom locknut for height adjustment. ...then raise the car by turning the whole unit in the body . Mine where set like this from the box Top nut is about 20mm down from the top of the thread on all four...then just adjusted height once on car (gen 6 by they way) How far did you wind the top locknut back up? Sounds like it maybe needs to go higher? If there's not enough pre-load tension (nut not wound high enough up) I would have thought the car would a bit bouncy, and lower...As there will be more travel on the spring. I know it's more than likely going to be different for the gen7 but here's a pic of the rear on mine from weekend Best bet is give Meister a pm/call just to check the settings

New gen 6 LuK clutch kit.