ArgoS Posted September 10, 2013 Report Share Posted September 10, 2013 Does anyone know if a 7a-fe's drive shafts will fit a 3s-fe's or more to the point just the inner cv joints ??? Link to comment Share on other sites More sharing options...
Old Red Celica Posted September 10, 2013 Report Share Posted September 10, 2013 NO, well I say no. But the engines are different, gearboxes are different, brakes are different. Link to comment Share on other sites More sharing options...
Wickie Posted September 10, 2013 Report Share Posted September 10, 2013 Which do you need the inner CVs for the 7A-FE or the 3S-FE If it's for the 2ltr 3S-FE and you can't source them try the link below, these guys re conditioned my inner CVs for a 3S-FE a few years ago, very reasonable and very helpful, they also pick up and drop off when complete, if it's for the 7A-FE you will pick these up reasonable second hand as the SRs STs are more plentyful breaker wise. Hope this helps. http://www.driveshaftuk.com/?gclid=CMPVse3VwbkCFaKWtAod_1YAYw Link to comment Share on other sites More sharing options...
ArgoS Posted September 10, 2013 Author Report Share Posted September 10, 2013 Cheers for the replys Link to comment Share on other sites More sharing options...
Recommended Posts