MattW Posted May 30, 2013 Report Share Posted May 30, 2013 (edited) http://www.halfords....yId_255207#tab1 I'm in need of a low profile trolley jack as the TRD skirts are pretty chunky beasts. Just wondered if any of you guys here have used the trolley jack as linked above please? Any good? Ta folks Edited May 30, 2013 by MattW Link to comment Share on other sites More sharing options...
dublet Posted May 30, 2013 Report Share Posted May 30, 2013 I have a Halfords trolley jack. It's not the greatest but does the job. I would imagine that one is the same. Link to comment Share on other sites More sharing options...
Coxymoron Posted May 30, 2013 Report Share Posted May 30, 2013 Depends how low your car is, we cracked my mates skirts on his corsa because it was too low, but then again his car was stupidly low. Link to comment Share on other sites More sharing options...
johnyboy1976 Posted May 30, 2013 Report Share Posted May 30, 2013 I have the regular jack and doesnt fit under - would think this one should though. Best way is to drive to nearest one and ask them to let you test it - no reason they wouldnt let you if leads to a sale Link to comment Share on other sites More sharing options...
MattW Posted May 30, 2013 Author Report Share Posted May 30, 2013 Cheers folks! ^^ I'll try that idea cheers John. I'd imagine they'd be okay with that! I have a Halfords trolley jack. It's not the greatest but does the job. I would imagine that one is the same. That's good enough for me, thanks bud! Link to comment Share on other sites More sharing options...
armoredfist2002 Posted May 30, 2013 Report Share Posted May 30, 2013 I have one. It only goes under the TRD skirts about 3/4 of the way, as only the front of the Jack is low profile, the side nearest the handle is still full height. It just about works to lift the car up. Link to comment Share on other sites More sharing options...
MattW Posted May 30, 2013 Author Report Share Posted May 30, 2013 Ah, that's disappointing! I guess I'll have to ask to test it first and then if no good I'll get searching again. Thanks for the feedback, dude. Link to comment Share on other sites More sharing options...
johnyboy1976 Posted May 30, 2013 Report Share Posted May 30, 2013 The TRD skirts on a 6 are different to those on a 7 - it might not fit but still worth a trip to halfords to be sure Link to comment Share on other sites More sharing options...
maizey Posted May 30, 2013 Report Share Posted May 30, 2013 Hi,if you have a "Machine Mart" close to you they do "CTJ2250LP,2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance"@ £48.The CTJ2QLP is a lower profile jack@ £120.They also do a Ultra low profile jack (CTJ1500QULP) but at £180 you'll ned to do a lot of jacking to get the benefit . . . . .so to speak ! Link to comment Share on other sites More sharing options...
Recommended Posts