matt1280 Posted November 22, 2012 Report Share Posted November 22, 2012 Anyone used this grease before for there brake caliper slider pins? Link to comment Share on other sites More sharing options...
thermoacc Posted November 22, 2012 Report Share Posted November 22, 2012 I havent seen this stuff in a while! I used it on brake calipers/pistons in my Ford days. Very effective for sticking pistons if the car is not used much. Not used it since I had Lexus/Toyota cars.....funny that! . Link to comment Share on other sites More sharing options...
matt1280 Posted November 22, 2012 Author Report Share Posted November 22, 2012 So its good stuff then? Just thought id check before buying. as im going to be cleaning up my brakes for winter Link to comment Share on other sites More sharing options...
planc Posted November 22, 2012 Report Share Posted November 22, 2012 Yeah its good stuff, if you get new seal kits from Toyota you get a little pouch of the stuff for the piston seal and sliders, the Toyota stuff is pink. If you use copper grease or general purpose grease the slider boots swell causing the sliders to be too tight to move. Link to comment Share on other sites More sharing options...
petest202 Posted November 22, 2012 Report Share Posted November 22, 2012 yea i used it when i had sticky calipers on the last celica. new celica ok at the mo, but i will get around to taking them apart and using red rubber grease on the sliders. Link to comment Share on other sites More sharing options...
martinking6 Posted November 22, 2012 Report Share Posted November 22, 2012 I use this grease on all the rubber seals, etc on the rotational inner edge of the cam/crank seals for example and on anything rubber when I am assembling engines, components, etc its great stuff Martin Link to comment Share on other sites More sharing options...
matt1280 Posted November 23, 2012 Author Report Share Posted November 23, 2012 (edited) I rebuilt the brakes at the beginning of summer with new seals and slider bolt shims, but just want to make sure there all clean an greased for winter to stop any corrosion Bought the grease now then realised I had ran out of copper grease so just ordered 500g of that to Can't wait for my week off now got a few jobs to do, just hope it doesn't rain all that week Edited November 23, 2012 by matt1280 Link to comment Share on other sites More sharing options...
Xanadu Posted December 3, 2012 Report Share Posted December 3, 2012 (edited) Reply deleted. (Mod's can remove) Edited December 3, 2012 by Toy'Boy Link to comment Share on other sites More sharing options...
Recommended Posts