Jump to content

headlight sealant


Recommended Posts

what type of sealant is used to seal headlights? when i open mine i want to seal it with the same type of stuff so i can open it with a heatgun and knife again if need be. but i dont know what sealant im after... all i know is its black, quite soft and melts very easily with a heat gun...

Link to comment
Share on other sites

tooth paste size tube... im guessing im gonna need a few of them. you dont happen to recall what it was called do you? so i can search for it online, mite find it cheaper on ebay

Link to comment
Share on other sites

can't remember the name but in my store it was opposite the paint. They only had 1 type.

And the toothpase size tube is plenty. I've still got a quarter left and i wasn't shy with it on both headlights.

You can't get all the original stuff off, so when you're done, you can put the lights back in the oven to reheat the original sealant and it'll hold the lights tight.

Then there's the screws to further hold the 2 pieces together.

I just used the sealant to run a nice thick bead along the join to ensure they're sealed.

Messy but thorough.

ta-da

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_749365_langId_-1_categoryId_165691

or there's also this one

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_173106_langId_-1_categoryId_165691

Edited by InsolentMinx
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.