bazz54 Posted May 30, 2011 Report Share Posted May 30, 2011 Can anyone recommend a good high-temp paint for use on an exhaust heat shield (thin/rusty sheet metal, quite close to the downpipes)? It's ages since I last used anything like that and whatever I used (cannot remember, may been Hematite?) it flaked off withing a couple of weeks. Do metallics or solid colours last best? Link to comment Share on other sites More sharing options...
sonic Posted May 31, 2011 Report Share Posted May 31, 2011 you want vht paint , read thru what temps it can with stand , the flame proof is a must on manifolds and exhausts (very very high temp paint) but is mat finish (black or red) , normal vht will burn off , but everything else (rockers covers etc) normal vht can be used , comes in various colours inc metalics , wrinkle effect and .......... anodised Link to comment Share on other sites More sharing options...
Ghoulie Posted May 31, 2011 Report Share Posted May 31, 2011 Powdercoating Link to comment Share on other sites More sharing options...
Recommended Posts