Biggy
-
Posts
6,738 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Club Shop
Collections
Everything posted by Biggy
-
I have a lense available if needed?
-
Urgent Help Needed! trying to remove springs from shock
Biggy replied to davetrigz's topic in General Celica Discussion
should have rang me Dave ,i would have sorted it for you.. -
If you spin it and listen you normally can hear the rumbling/droning if there noisey...
-
Possibly mate.....
-
Turning will put pressure on bearing..Normally opposite side your turning..
-
Try spinning the wheel by hand when it jacked up,A bearing doesn't have to have play to be noisey and knackered..
-
I voted the last one It's up to you at the end of the day but there not for me..
-
The ST rear calipers have smaller pistons than the GT model.. It could be handbrake sticking on?
-
depends if it has any issues ..
-
looking for a thread about referb DIY?
Biggy replied to bigstring's topic in General Celica Discussion
sonic temple,for me i used a wire brush on a drill for any corrosion then flatted the wheel with 600 and a scotchpad for hard to reach parts..Sonic used a wire brush on a grinder i think.. -
I have a cat available ,pm sent
-
Some tin snips always handy for making up panels..g clamps ,mole grips..
-
Can cracks on rims be welded and is it advisable?
Biggy replied to wilbo83's topic in General Celica Discussion
I wouldn't personally have it done... -
I think any kerbing etc is extra..
-
It's about £110 a ton for scrap metal.. depending where you are
-
If you did manage to cut a slot in the nut holding the pulley on just use a spanner ring end as it will most prob break of..
-
You have seen the light Dan ,nice looking gen 6 you have there...I owned a s14a for a while and do miss the power but the celica is fast enoguh for everyday use...especially as i have lots of celica parts so cheap to run..
-
possibly,just stick them up on here someone may want them..
-
find a local scrap metal merchant ,the one near me gives you £1 a kg for alloy wheels without tyres ..
-
I would say grey ...
-
The front brakes inbalance could be just the caliper sliders need greasing,Or if there siezed i can do you good used calipers... Passenger seat insecure??could be bolts missing?or worn seat? rear seat just need bolts?(i can supply these) I dont have a n/s headlamp at the moment..