Jump to content

Bumblebee

Club Member
 View Profile  See their activity

  • Posts

    5,187

  • Joined

  • Last visited

  • Days Won

    48

 Content Type 

Everything posted by Bumblebee

  1. Bumblebee
    cant remember off hand but they are scooby fitment look absolutely perfect fit but i dont suppose 2mm is going to make much difference, will just have to take it steady for a few days till i get back to work
  2. Bumblebee
    35mm as my wheel offset is not standard
  3. Bumblebee
    i think i can get the spacers machined at work for a coupe of beers
  4. Bumblebee
    well was desperately in need of 2 new tyres on the front so bit the bullet today .Had the rears put onto the front and 2 new proxes on the rear, Decided to go for 40 profile instead of the 35 which were on due to the harsh ride and also the £60 a tyre difference . Only problem now is that they just rub the rear arches when cornering hard , looks like im going to have to have a couple of mill machined off the spacers , dont really want the arches rolled ,Doh
  5. Bumblebee
    im sure there is a place in Grimsby who make them and repair them , dont know cost though
  6. Bumblebee
    it is self tensioning , you cant adjust it
  7. Bumblebee
    i have had to replace mine approx every 18 months over the last 6 years due to being noisy
  8. Bumblebee
    apparently it can be a real pita to do but to be honest i didnt find it that hard , just take your time , can take 30mins to do it right , take your time , do it right , do it once
  9. Bumblebee
    same really once you have refilled system you need to bleed it to remove air, just follow it from the point you have filled system it does help to massage both rad hoses and make sure heater is set to hot otherwise the valve will be closed and you wont pump the air away
  10. Bumblebee
    look under your bonnet there should be a sticker which explains how to do it
  11. Bumblebee
    i bet your neighbours love you lol
  12. Bumblebee
    if they have snapped off flush you will have to drill them out and get a stud extractor on them, soak them in realease oil first
  13. Bumblebee
    im with izzy on this David , i would contact ebc online and explain , shouldnt happen , mine had just broken in two , friction material that is , and half had fallen away but like i said i had had problems with a sticking caliper , that disc was blue
  14. Bumblebee
    had this with my last set of redstuffs on one side , this side had been sticking and causing overheating earlier on in the year so i put it down to that
  15. Bumblebee
    do you really think he was trying ?
  16. Bumblebee
    and worth every penny im sure
  17. Bumblebee
    come on lads lets keep it friendly looks like you must have ust beat me to it Mick lol
  18. Bumblebee
    not usually because the rain water is evaporated water and doesnt contain solids
  19. Bumblebee
    you cant beat washing the car in the rain , no watermarks left due to rain water holding no calcium
  20. Bumblebee
    lol , wouldnt be good for us all to be the same mate , after all if that was the case we would all be driving yellow and black cars
  21. Bumblebee
    good move Pickles, you wont regret it mate and Wayne would have been gutted lol
  22. Bumblebee
    i must be getting old lol
  23. Bumblebee
    good to see you are still about Felfy, what the hell is skyrim ? and have you seen the additional covers for these, very nice
  24. Bumblebee
    maybe wouldnt sell my soul but still very nice still you cant buy taste can you ?
  25. Bumblebee
    bloody hell felfy , not seen you on here for ages or is it im just going blind ?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.