3241AJONES Posted July 10, 2015 Report Share Posted July 10, 2015 (edited) I have had my Gen 6 off the road for a couple of months and on re-connecting the battery the drivers side indicator is permanently stuck on even with the ignition turned off. Any ideas please ? It was fine before . Edited July 10, 2015 by 3241AJONES Link to comment Share on other sites More sharing options...
princy Posted July 10, 2015 Report Share Posted July 10, 2015 Stuck relay? Link to comment Share on other sites More sharing options...
3241AJONES Posted July 10, 2015 Author Report Share Posted July 10, 2015 Possibly , but can't seem to find which one it is in the handbook. Link to comment Share on other sites More sharing options...
princy Posted July 10, 2015 Report Share Posted July 10, 2015 Actually the relay shouldn't be live with the ignition off, I take it, it has an alarm that flashes the indicators when armed/disarmed? Could well be an issue with the alarm with it having been standing Link to comment Share on other sites More sharing options...
3241AJONES Posted July 10, 2015 Author Report Share Posted July 10, 2015 It was making a strange noise when i connected it back up so i disconnected it and tried again but indicator was still on . Link to comment Share on other sites More sharing options...
princy Posted July 10, 2015 Report Share Posted July 10, 2015 It still did it with all the connections to the alarm unplugged? Link to comment Share on other sites More sharing options...
3241AJONES Posted July 10, 2015 Author Report Share Posted July 10, 2015 No i've not unplugged anything from the alarm yet i meant i disconnected the battery again . I will try unplugging the alarm connections over the weekend to see what happens . Cheers. Link to comment Share on other sites More sharing options...
princy Posted July 10, 2015 Report Share Posted July 10, 2015 It'd be the first place I'd look given what you've said Link to comment Share on other sites More sharing options...
Recommended Posts