wintersun Posted March 19, 2015 Report Share Posted March 19, 2015 Has anyone removed their speedo, Rev, temp & fuel needles and put them back on and recalibrated them so they are correct again? I have red needles on gen 6 (red sharpie pen) and I have a replacement set to put them back to white again. But I'm worried if I remove the red ones I wont be able to set the replacemts right again. Anyone done this before and how? Link to comment Share on other sites More sharing options...
carlasumm Posted March 21, 2015 Report Share Posted March 21, 2015 take photo first so you know where to put the fuel needle back on at temp should just go back on at the place where you remove it from as in 0 rev counter start the car let it warm up and take a picture where the needle idles at then replace once done speedo leave front plastice cover off drive down the road and reset using your satnav speed setting 1 Link to comment Share on other sites More sharing options...
Recommended Posts