myimportedbeast Posted October 18, 2013 Author Report Share Posted October 18, 2013 Super stuff cheers pal :-D Link to comment Share on other sites More sharing options...
Limeymk1 Posted October 18, 2013 Report Share Posted October 18, 2013 Aah rite were they bad? Good luck either way lol :-D They were the damaged ones that he had advertised so nowt unexpected, it'll take a while to get them up to scratch I think, one skirt has had a previous repair with fibreglass and body filler which will need stripping back if I can. I'll be taking lots of piccies and will try to do a bit of a write up. Link to comment Share on other sites More sharing options...
myimportedbeast Posted October 18, 2013 Author Report Share Posted October 18, 2013 Aah good plan I shall do the same :-D Link to comment Share on other sites More sharing options...
myimportedbeast Posted October 23, 2013 Author Report Share Posted October 23, 2013 Update on me fixing the skirt....look what i did today Pics on way. ...... Link to comment Share on other sites More sharing options...
matt1280 Posted October 23, 2013 Report Share Posted October 23, 2013 Nice one mate! How did you straighten out in the end? Link to comment Share on other sites More sharing options...
myimportedbeast Posted October 23, 2013 Author Report Share Posted October 23, 2013 Thanx :-) used a heat gun and pressure and kept the pressure on till it cooled...needs sanding but do I use a gritty paper then go smoother eventually to 2500 wet n dry and also I'm guessing plastic primer? Link to comment Share on other sites More sharing options...
dazzy Posted October 23, 2013 Report Share Posted October 23, 2013 80g to 120g to 240g then bury any furring in plastic primer then wet flat with 800g then 1200g . That's how I role at work Link to comment Share on other sites More sharing options...
Recommended Posts