digs Posted July 18, 2013 Author Report Share Posted July 18, 2013 As above, it will be immersed in petrol so will need to be petrol resistant. IMO use a piece of petrol hose as insulation, and make it long enough that if it drops all the way down the wire, the joint will still be covered - i.e. make the wire above the joint longer than below and put the tubing above while making the joint. DONT use sticky tape, the stick won't last 2 minutes. Don't rely on cable ties unless you use petrol resistant or stainless ones (the latter WILL conduct of course) Don't mount the wire in such a way that it can rub on any metalic surface and wear away the insulation. Hi, sorry, never responded! Thanks, I am going for your plan, should last me Link to comment Share on other sites More sharing options...
Recommended Posts