rota2010 Posted May 30, 2013 Report Share Posted May 30, 2013 Hi all just to share with you, myself and my gf dad did the conversion for my super strut to the UK version suspension as the knuckle broke on the super strut arm, so AMS suggested for me to purchase the parts from him and go for the UK suspension set up, the guy gave me very good advice, all works now as it should, as it was our first time to change the conversion over it took us several hours to do, only problem I have now is that my airbag light is on and I dont know what to do to remove it, so going to have a steering conversion done and go for an OMP steering wheel, 320mm Thanks for viewing Link to comment Share on other sites More sharing options...
Zorg Posted May 30, 2013 Report Share Posted May 30, 2013 I'm also considering the swap (GFs Gen7). What were the parts needed for the swap? Cheers. Link to comment Share on other sites More sharing options...
rota2010 Posted May 30, 2013 Author Report Share Posted May 30, 2013 Hi Zorg give AMS a PM as he's got some special offers on for this week, not to be missed, he will tell you everything you need, Thanks from Luca Link to comment Share on other sites More sharing options...
Zorg Posted May 31, 2013 Report Share Posted May 31, 2013 Cheers. I think I've got what's needed but just wanting to confirm that I also need to change the driveshafts. Link to comment Share on other sites More sharing options...
ams Posted May 31, 2013 Report Share Posted May 31, 2013 Dont need to change driveshafts Its the full subframe, hubs, steering rack and struts/springs - I supply it in 3 pieces to make fitting easier - Calipers are same As Im clearing out temporarily I am selling these at ridiculously cheap price Luca - the airbag light - I suspect that the steering wheel has been turned too many revolutions 9when the rack was disconnected) and you have damaged the clock spring behind the wheel - I have these and can sell you one at a discounted price if you need it Glad to hear you have done it yourself - did you do it on the floor? Link to comment Share on other sites More sharing options...
rota2010 Posted May 31, 2013 Author Report Share Posted May 31, 2013 Hi AMS thanks for all your input and help, I did it with my gf's dad at his garage, hes got ramps so it made it a bit easier, what is the cost of the spring I need can you pm me please Link to comment Share on other sites More sharing options...
Recommended Posts