skatz114 Posted April 10, 2013 Report Share Posted April 10, 2013 Where's the best place to get these? I only need 10 for the front cos I've got 27mm bolt ons on the rear. I've got a set of 10mm spacers I'd like to put on. I've tried freakyparts but Stewart couldn't help Link to comment Share on other sites More sharing options...
MYK Posted April 10, 2013 Report Share Posted April 10, 2013 Fensport and ask for them to be ground down Thats where I got mine from anyway! http://www.fensport.co.uk/Parts/Model_16/Category_7/3469 Link to comment Share on other sites More sharing options...
Wickie Posted April 10, 2013 Report Share Posted April 10, 2013 (edited) my bad lol should read title lol but as MYK said buy off fensport and take to a local engineering company and get them cut to your required length if fensport cant do for you? Edited April 10, 2013 by Wickie Link to comment Share on other sites More sharing options...
MYK Posted April 10, 2013 Report Share Posted April 10, 2013 4 5mm spacers? 2 on each side? Would still need extended wheel nuts... Link to comment Share on other sites More sharing options...
skatz114 Posted April 10, 2013 Author Report Share Posted April 10, 2013 ^^^^ Nah mate, 2 10mm spacers. Thanks for that, I'll contact them today Link to comment Share on other sites More sharing options...
J03 Posted April 10, 2013 Report Share Posted April 10, 2013 Always dubious about this whole grinding down issue with the fensport studs, if you're doing them right then they shouldn't need any splines shaving back. Link to comment Share on other sites More sharing options...
skatz114 Posted April 10, 2013 Author Report Share Posted April 10, 2013 Found these Mtec ones on ebay, any good you think? No pic but the description seems right. Standard length + 13mm http://www.ebay.co.uk/itm/280621284749?_trksid=p5197.c0.m619 BTW how much of a job is it to get the old ones out? Link to comment Share on other sites More sharing options...
MYK Posted April 10, 2013 Report Share Posted April 10, 2013 I'd offer some advice but ain't had chance to do mine yet Will do it on Saturday I hope! Link to comment Share on other sites More sharing options...
Recommended Posts