bly1984 Posted November 24, 2012 Report Share Posted November 24, 2012 Alright all, Just had a set of new tyres fitted to my gen 6 which has highlighted a problem. My nearside front camber is out by about 2.5 degrees which the garage said they could not adjust. I have only recently bought the celica a few month back but i know it took a knock to that wheel because i had to have it straightened. Does that suggest its bent something elsewhere? If thats the case anyone got a clue what it could be? Cheers Alex Link to comment Share on other sites More sharing options...
ams Posted November 24, 2012 Report Share Posted November 24, 2012 wishbone would be my first guess, then leg, then hub, then subframe - very hard to see if its marginally out and sometimes easier to change 1st 3 in one go from good car Link to comment Share on other sites More sharing options...
planc Posted November 24, 2012 Report Share Posted November 24, 2012 You need to ask the garage why it would not adjust, it may be down to a seized adjuster that they couldn't be arsed to free off. Link to comment Share on other sites More sharing options...
Recommended Posts