Gstraw Posted November 4, 2012 Report Share Posted November 4, 2012 Hey I was wondering what loctite is required to glue the studs into the spacers? ive got the wheel off and about to go to halfords to buy some right now so a fast reply would be very much appreciated! thanks! Link to comment Share on other sites More sharing options...
sh3p Posted November 4, 2012 Report Share Posted November 4, 2012 http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_199363_langId_-1_categoryId_255230 the threadlock that way you can remove if needed without issues Link to comment Share on other sites More sharing options...
Gstraw Posted November 4, 2012 Author Report Share Posted November 4, 2012 Do I not want the permanent one though for extra protection? I probably won't need to take the studs out though. I'm worried incase when I remove the wheel nuts, the studs might come loose if they are not secured permanently? Link to comment Share on other sites More sharing options...
kyle_winterburn Posted November 4, 2012 Report Share Posted November 4, 2012 Loctite do one called stud lock not sure if halfords do it but that would be best. Is semi permanent and can be removed if needed Link to comment Share on other sites More sharing options...
mark165 Posted November 4, 2012 Report Share Posted November 4, 2012 (edited) Threadlocker or studlocker will do the job just fine. Edit: grade 271 for stud lock was the engineering grade i used. Edited November 4, 2012 by mark165 Link to comment Share on other sites More sharing options...
Trebor4460 Posted November 4, 2012 Report Share Posted November 4, 2012 Red for perminant, blue for semi.. I would use the red if it was me on the studs. Link to comment Share on other sites More sharing options...
Recommended Posts