mikca01 Posted July 9, 2012 Report Share Posted July 9, 2012 is there anywhere that does a full kit for a 202? for a reasonable price. had a look on fleabay was a couple of sets for £179 from poland but nothing else. Link to comment Share on other sites More sharing options...
Biggy Posted July 9, 2012 Report Share Posted July 9, 2012 This is where i was looking,think its the ebay guy though.. http://www.gt4-racing.eu/index.php/toyota-celica-st202 Link to comment Share on other sites More sharing options...
Hou Posted July 9, 2012 Report Share Posted July 9, 2012 From looking myself them from Poland were best to get, theguy traded on GT4OC Link to comment Share on other sites More sharing options...
Black Knight Posted July 9, 2012 Report Share Posted July 9, 2012 Fensport do the Super Pro ones: http://www.fensport.co.uk/Parts/Model_14/Category_2/ Though not as a complete kit! But, at least you know you'll be getting something guaranteed to fit with no import postage problems. Link to comment Share on other sites More sharing options...
mikca01 Posted July 9, 2012 Author Report Share Posted July 9, 2012 (edited) found this site but its for a superstrut. bloody good price tho http://www.google.co...qgu5tEZuk3W6kbA its £289 for a non superstrut i thought a non superstrut would have been cheaper Edited July 9, 2012 by mikca01 Link to comment Share on other sites More sharing options...
Briano Posted July 9, 2012 Report Share Posted July 9, 2012 its £289 for a non superstrut i thought a non superstrut would have been cheaper superstrut polly bush kits use less bushes, non superstrut use more bushes so simple accountancy Link to comment Share on other sites More sharing options...
mikca01 Posted July 9, 2012 Author Report Share Posted July 9, 2012 yeah think the cheapest ive found are £286 for the full kit Link to comment Share on other sites More sharing options...
Briano Posted July 9, 2012 Report Share Posted July 9, 2012 yeah think the cheapest ive found are £286 for the full kit the pollish guy is way less than that http://www.gt4-racing.eu/ Link to comment Share on other sites More sharing options...
mikca01 Posted July 9, 2012 Author Report Share Posted July 9, 2012 the pollish guy is way less than that http://www.gt4-racing.eu/ yeah looks like about 240 posted for front and rear. could be the best option,was over speaking to the guy thats fitting the head and cams today but still got a bit of an issue with the suspension. i put new springs and koni adjustables on it and the konis seem to work it firms up right and softens on all 4 corners but feels a bit saggy in the bends or a rough road. think i could do with droplinks after taking it round the track at crail yesterday to! Link to comment Share on other sites More sharing options...
azza1984 Posted July 9, 2012 Report Share Posted July 9, 2012 (edited) i got the front kit from the polish guy and they fit perfect the hardest part was removing the old ones absolute nightmare when your in your front street with just a hammer and some sockets! another thing get the uprated crush tubes from japspec performance as the original crush tubes weld themselves to the old bush! i didnt realise this put it all together and had a horrible knock! Edited July 9, 2012 by azza1984 Link to comment Share on other sites More sharing options...
markjbutler Posted July 12, 2012 Report Share Posted July 12, 2012 quick Q... is it poss to remove the subframe without dropping the engine? also have you looked at the kits that TCB offer? Link to comment Share on other sites More sharing options...
Biggy Posted July 12, 2012 Report Share Posted July 12, 2012 quick Q... is it poss to remove the subframe without dropping the engine? also have you looked at the kits that TCB offer? You could do but would have to support engine and gearbox..you could use an engine beam to support it..prob not the easiest thing to do though.. Link to comment Share on other sites More sharing options...
markjbutler Posted July 12, 2012 Report Share Posted July 12, 2012 You could do but would have to support engine and gearbox..you could use an engine beam to support it..prob not the easiest thing to do though.. Mmmm... shame - was thinking about refurbing and bushing the subframe from my 'spare' car but sounds like a pita. Link to comment Share on other sites More sharing options...
Recommended Posts