Kobir Posted February 26, 2012 Report Share Posted February 26, 2012 so as you can see by the topic title, you can see my problem, today i was taking out the throttle body and the idle control valve, as i was taking out the air filter box, one of the bolts snapped and in stuck, also the bolt on the ecu box has also snapped, i know i can still drive fine without those bolts but I'm afraid I'm bait of a perfectional freak and everything has to be perfect, specially when it comes to my pride and joy, so the big question is which I'm sure all you guys have figured out, HOW THE F..K DO YOU GET THIS BOLTS OUT and also where can i get the same exact sized bolts from?, any help would be much appreciated guys, thanks in advance kay Link to comment Share on other sites More sharing options...
sbdags Posted February 26, 2012 Report Share Posted February 26, 2012 You'll have to drill them out and then retap the thread possibly. Shitty job unfortunately. Link to comment Share on other sites More sharing options...
Bumblebee Posted February 26, 2012 Report Share Posted February 26, 2012 if they have snapped off flush you will have to drill them out and get a stud extractor on them, soak them in realease oil first Link to comment Share on other sites More sharing options...
Kobir Posted February 26, 2012 Author Report Share Posted February 26, 2012 (edited) anyone had experience on doing this and can offer to do it for me or know of a place in the london area who can help me Edited August 2, 2012 by kay04tsport Link to comment Share on other sites More sharing options...
Recommended Posts