woodhouse Posted July 21, 2011 Report Share Posted July 21, 2011 (edited) sorry mods if this aint in the right place. just wanted to know if we have anybody in the club that deals or buys springs as my new job is at a place that makes springs for moto and car racing also i know that they supply a fto specialist in newcastle. . Any way if this can help then i will get some info. scott. Edited November 21, 2011 by woodhouse Link to comment Share on other sites More sharing options...
chadman09Paul Posted July 21, 2011 Report Share Posted July 21, 2011 At the right price i am interested in dropping the rear of the Gen 7 about 25mm. Good luck Link to comment Share on other sites More sharing options...
woodhouse Posted July 21, 2011 Author Report Share Posted July 21, 2011 (edited) . Edited November 21, 2011 by woodhouse Link to comment Share on other sites More sharing options...
woodhouse Posted July 22, 2011 Author Report Share Posted July 22, 2011 for get the above any number of springs can be done and any spring all that is needed a spring the same or the spring that you want shortened or lenthened if that makes sense? Link to comment Share on other sites More sharing options...
woodhouse Posted July 30, 2011 Author Report Share Posted July 30, 2011 http://www.springcoil.co.uk/suspension.html check this website out. if any1 interested let me know. Link to comment Share on other sites More sharing options...
woodhouse Posted August 10, 2011 Author Report Share Posted August 10, 2011 (edited) anybody needing car springs adjusted/lowered let me know also can make any spring new need and only need a spring to copy from. 1 job today was making a new set of coil overs. Also just to let you know how good my firm is the currently make a lot of springs for , a fto dealer in newcastle, landrover, and a good few others. Any body interested let me know or contact http://www.springcoi.../contactus.html and tell them scott sent you. Edited November 21, 2011 by woodhouse Link to comment Share on other sites More sharing options...
woodhouse Posted September 28, 2011 Author Report Share Posted September 28, 2011 bump on any springs needed let me know Link to comment Share on other sites More sharing options...
hyper-wrap Posted September 28, 2011 Report Share Posted September 28, 2011 Might be interested as I've got some BC coilovers on their way which are...weathered...and wouldn't mind getting some springs in red? Before I click the link, I'll ask here...how much on average is it for a copy spring to be made? Link to comment Share on other sites More sharing options...
woodhouse Posted October 8, 2011 Author Report Share Posted October 8, 2011 Might be interested as I've got some BC coilovers on their way which are...weathered...and wouldn't mind getting some springs in red? Before I click the link, I'll ask here...how much on average is it for a copy spring to be made? to be honest mate i dont know how much they are in the shop,if you let me know i could ask for you and may be a little cheaper through me but i know they will be a lot cheaper then in the shop as your missing the middle man out. the springs are all hand made, individually coiled and set up. I set the coils up to the rate and load so we are very specific on all details,if your abla to send a sample spring then we can make anything and powder coat them. Link to comment Share on other sites More sharing options...
woodhouse Posted October 20, 2011 Author Report Share Posted October 20, 2011 (edited) 10% off for any club member Edited October 20, 2011 by woodhouse Link to comment Share on other sites More sharing options...
woodhouse Posted November 18, 2011 Author Report Share Posted November 18, 2011 (edited) all springs made or lowered. any make or model can be done all powder coated and delivered. brand new springs or re modeled or made to original. Edited November 18, 2011 by woodhouse Link to comment Share on other sites More sharing options...
woodhouse Posted November 18, 2011 Author Report Share Posted November 18, 2011 cant believe nobody is going for this. Link to comment Share on other sites More sharing options...
cooperman Posted November 18, 2011 Report Share Posted November 18, 2011 i think if you could put a rough price down then you may get some people interested. i will keep you in mind for work though. can you do batch stuff? and small batch stuff. small springs like throttle spring? Link to comment Share on other sites More sharing options...
woodhouse Posted November 20, 2011 Author Report Share Posted November 20, 2011 i think if you could put a rough price down then you may get some people interested. i will keep you in mind for work though. can you do batch stuff? and small batch stuff. small springs like throttle spring? hi mate we do all springs mate, we do anything from car springs,valve springs to little springs for thermostats,can do any number as well. we not like the big production line places every spring is made by hand. will speak to sales on monday and try and get a price. Link to comment Share on other sites More sharing options...
woodhouse Posted November 21, 2011 Author Report Share Posted November 21, 2011 had to do some adjustments to the thread as i used company names that may not be too happy if they saw it if you know what i mean plus hope im not stepping on any1`s toes here in the club by advertising this. I put this thread on to maybe help fellow members. the rough price is £70 a pair but add delivery on top(for got to ask what we charge) but if your picking them up then obviously no charge. this price includes powder coating but it is rough as all springs have a different set up.All will be explained if you phone for an order or an inquiry.had to retract the 10% as well because the springs are that cheap its not worth while puttin extra 10% off on them. Am sure i have for got something here but any question to me and can get answers also we can lower springs. hope this helps and if i am stepping on any1`s toes i will get mods to delete this thread Link to comment Share on other sites More sharing options...
woodhouse Posted November 22, 2011 Author Report Share Posted November 22, 2011 just had a look on ebay and looks like the springs at my place are a bit pricey so if the mods want to drop this thread then thats cool with me Link to comment Share on other sites More sharing options...
Recommended Posts