-
Posts
4,839 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Events
Gallery
Club Shop
Collections
Posts posted by slybunda
-
-
I think your pulling more than just our legs here mate
-
Wot brand pads?
-
im sure i can get M7 or M8 nuts and bolts to do a proper job of holding the under tray on, dont need to do all of them, just the ones ate the front and the ones at the back. middle ones can use the plastic push clips.
could easily weald some stainless bolts to the undertray clip holes. hmmm
-
my ebay order clips arrived yesterday form the link above, look decent enough only time will tell. delivery did take its time though from hong kong.
-
Odd that you saw where the Honda driver went and didn't follow to provide an ass kicking.
-
I need wot tony has a crawler to Go under the car.
-
Show the pics of how it looks now you fixed it.
-
son of a bitch wankers. I can understand why the culprit didn't stick around. when you prang a car as good as a celica there is a high probability that the owner comes out not looking to take insurance details but to hand out an ass whuppin. in this one instance club stickers mean the owner is someone who is into the car and the likely hood of the ass lashing will be very high.
I feel for you tom. if this happened to me I sometimes wonder if its better the culprit drives away otherwise my temper would get the better of me and then i would end up getting done for it.
- 1
-
gonna order these I was missing a few on my undertray and some got bust in the process of taking them out.
-
will check on Saturday, planning to do the gearbox oil change.
-
hmm wonder if its possible to do some sort of captive nut and bolt job for an even more secure setup.
-
hmm i got some which are too big for the under bonnet plastics too. wonder if those are the ones.
im guessing zip ties would be a far more secure method then the clips.
-
i got like a pack of 100 of those i think from amazon a while back, i used them for the under bonnet plastics. didnt know they were the same ones for the undertray. nice to know.
-
I got those ebay rears and they were the wrong size. sent them back and bought blueprint ones from nyanza. no point cheaping out, they last long enough to warrant putting decent branded ones on.
-
Sk20r11 is original plugs. Vk20 is longer life. I use ik20 which are TRD spec but have shorter life.
-
thats not good to hear, is your HID less bright compared to normal bulbs?
-
i use those sidelights in the above link, and they are clearly blue in colour. was a bit pissed at that since i wanted white ones. blue makes ya look chavvy.
-
or cover it with bodykit as iv seen on a lot of corsas
-
yea i never was happy then they hammer tested the car. proper peed me off. its just as bad when they stick that screwdriver thingy into you wishbone bushes which i think causes more damage then regular wear and tear would.
-
my fiesta was bady corroded on the sils, and after much patch work welding i got both sils replaced.
but i deo remember them testing it with a hammer and smacking it all around the car.
in hindsight the ones with the plastic kits on sils hide the rust and let it pass mot forever!!!
-
they will hit it with a hammer normally, and if hammer goes through then its fail.
-
yea, but with all bulbs i guess its good to keep a spare in the car at all times.
-
damn hope it gets all sorted out. im still reluctant to go for HIDS, but maybe one day.
-
where did you get your bulbs from?
Plastic Undertray push retainers
in Consumable Parts
Posted
What size bolt did you use? I think m6 may be the correct size. I got wing nuts too but not sure if they would shake loose with the viberations thinking nyloc nuts would be better?