Jump to content

Dorris

Club Member
  • Posts

    1,785
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by Dorris

  1. There is always the Kart club for a bit of a fix if you can call it that. Never noticed a Celica last time I was down there back in 08. Cant see a Gen 5 lasting long with all that salt air, mind you some of then roads down there would make great rally stages, Id love to find out how quick I could get from MPA to Stanley in my GT4. Dorris

  2. As the others of said but it is vital not to over torque the bolts as it will be so easy to crack the casing.

    I have also had the same issue on all mine 3S engines but I have actually found a cure. Clean the 2 surfaces, apply a bit of gasket sealant then use hex or Allen head bolt but the secret is to use spring or shake proof washers between the head of the bolt and the plain washer, ie bolt head, spring washer, plain washer and casing. I have found this stops the leaks. Dorris

  3. I got all mine off the car, steam cleaned, stripped, degreased, painted them with red oxide primer first and then with red Hammerite, even after 2 or 3 coats it looked a bit thin and naff, I think I used 4 coats over a space of a week.

    I painted the underside first let it dry then did the tops last, when completely dry I finished off by put some heat resistant white Celica graphics across the out side edge of the caliper. They looked sweet when I finished them and put them on the car but after a few miles of brake dust they don’t stand out as much now. It is a bit of a long slow process waiting for the paint to dry properly. Dorris

  4. Minimum of 1.6mm of tread across the tyre, if your tracking is out this can kill your tyres very quickly and so can the wrong camber by lowered springs.

    Your brakes will probably be sorted with a good brake service; did they give you a print out from the Roller Brake Tester? This will tell you where your problems are. Dorris

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.