Craden Posted June 18, 2016 Report Share Posted June 18, 2016 Hey everyone! So I'm still in the process of fitting my undercar leds. All going great so far until now when I'm ready to fit the front strip. I must be blind but does anyone know the best way of running the cable which is coming from my front bumber thru to the center consol? Link to comment Share on other sites More sharing options...
Guest Ambermile Posted June 18, 2016 Report Share Posted June 18, 2016 (edited) Easiest is through the cabin filter - but there is a grommet driver's side down low you can reach if you have no regard for the skin on your knuckles, the muscles in your lower back, or the ears of your neighbours. **Edit - you can also go through the steering column opening if you're of a mind - easier perhaps but maybe a wee bit close to the manifold. Edited June 18, 2016 by Ambermile Link to comment Share on other sites More sharing options...
Craden Posted June 18, 2016 Author Report Share Posted June 18, 2016 Cheers! Having a good look earlier I have found a cable which comes through a gromit on the passenger side footwell under the carpet and into the center consol. Think it will be a matter of trial and error lol Link to comment Share on other sites More sharing options...
Recommended Posts