tabbaranx Posted March 20, 2015 Report Share Posted March 20, 2015 Hello, quick question, I'm getting my custom JDM centre console dipped in carbon effect and wondered if I should do the bezel around the clocks too or leave it stock? Don't want to overdo it. Opinions please? Link to comment Share on other sites More sharing options...
Foogles Posted March 20, 2015 Report Share Posted March 20, 2015 I would. That black surround doesn't really match anything so it seems silly keeping it. When I did my centre console I toyed with doing the speedo surround the same colour. As I was using orange I decided that could be too much orange so decided to spray the cubby hole flap black to match the speedo surround instead. Link to comment Share on other sites More sharing options...
Cleario Posted March 20, 2015 Report Share Posted March 20, 2015 I'd say do it, the carbon effect dip is a really nice finish. You could do a new more touches on too, I think it added a modern touch. Link to comment Share on other sites More sharing options...
tabbaranx Posted March 20, 2015 Author Report Share Posted March 20, 2015 Cool, I think i'll go for it! Cheers! Link to comment Share on other sites More sharing options...
pordy Posted March 21, 2015 Report Share Posted March 21, 2015 I would say go for it. I have seen a few mod threads where they have done the surrounding bit and it looks good and not OTT. I have just done mine in thunder grey and it looks fine Link to comment Share on other sites More sharing options...
Lewisek Posted March 22, 2015 Report Share Posted March 22, 2015 Yeah do it, parts wrapped in carbon can be overdone but the glossy pretty dipping makes it look epic. Link to comment Share on other sites More sharing options...
Recommended Posts