Kazi Posted October 29, 2014 Report Share Posted October 29, 2014 I'm having trouble removing the flywheel from my Beams right now. What's the best way to brace the flywheel so it doesn't move every time I try to undo the bolts? the engine is out of the car if that makes any difference. many thanks Link to comment Share on other sites More sharing options...
sadlebag Posted October 29, 2014 Report Share Posted October 29, 2014 You will probably need a second person and hold it steady with a crow bar! Link to comment Share on other sites More sharing options...
shaungt4 Posted October 29, 2014 Report Share Posted October 29, 2014 What i did mate was wedge a block of wood in the crank if you have the sump off works great and no damage from using wood. Link to comment Share on other sites More sharing options...
Alex991 Posted October 29, 2014 Report Share Posted October 29, 2014 This is where battery guns come in handy, they crack things off, can be a pain otherwise. I always use my small 3/8 gun for clutch plate bolts, however they are smaller and easier to crack off As said if using hand tools I would imagine another person with a bar fighting against you would be best Link to comment Share on other sites More sharing options...
Kazi Posted October 29, 2014 Author Report Share Posted October 29, 2014 got it off. wedged a bit of wood between the small bolts that hold the clutch onto the flywheel. took a bit of doing but got there in the end. cheers for the help! 1 Link to comment Share on other sites More sharing options...
Recommended Posts