Jump to content

Another Question


gen7nnb

Recommended Posts

After spraying, you initially end up with an imperfect, sort of speckled surface. You need to use a very fine wet and dry paper along with some soapy water to smooth the surface down. However, you will then be left with a dull finish so you then need to use a cutting polish to bring back the shine the the surface. I haven't yet got it perfect but some of the parts I have done have come out fairly nice!

As with what areas you need to wet sand, it is all of it but if there are major imperfections you may need to take right back and re-do.

I used just 1200 grit wet and dry for this but really I should've gone with a finer grade after that but don' have any.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.