ano Posted May 11, 2011 Report Share Posted May 11, 2011 (edited) I am not sure whether this is the right place for this topic Nevertheless, I am looking for someone that could produce a custom induction pipe with the following specs. Specs: 76mm polished aluminium pipe, 40cm length Welded-on a 25mm polished aluminium adaptor. The adaptor will be used for recirculation (dump valve) Here is a diagram: Edited May 12, 2011 by ano Link to comment Share on other sites More sharing options...
Dan23 Posted May 11, 2011 Report Share Posted May 11, 2011 you can buy these pre made on ebay mate, they work out about £30 or there abouts Link to comment Share on other sites More sharing options...
ano Posted May 11, 2011 Author Report Share Posted May 11, 2011 I never saw them to be honest. Closest I saw was 150/300mm length with breather up to 18mm. Link to comment Share on other sites More sharing options...
Dan23 Posted May 11, 2011 Report Share Posted May 11, 2011 well if not, you could ask them to make you one as they probably make them or have them made to order Link to comment Share on other sites More sharing options...
tctech Posted May 11, 2011 Report Share Posted May 11, 2011 failing the ebay route give bogg brothers a call http://www.boggbros.co.uk/ Link to comment Share on other sites More sharing options...
ano Posted May 12, 2011 Author Report Share Posted May 12, 2011 Thank you guys for your interest. Before me trying to contact others, I would like to check whether someone from the club could do the job Link to comment Share on other sites More sharing options...
Edd1Ninety9 Posted May 12, 2011 Report Share Posted May 12, 2011 Thank you guys for your interest. Before me trying to contact others, I would like to check whether someone from the club could do the job Don't think anyone welds ali on here I'd see if you have any friend in Cypress who can and just drop in the 3" pipe and adapter and see what they can do. Link to comment Share on other sites More sharing options...
mike5786 Posted May 12, 2011 Report Share Posted May 12, 2011 if I wasn't involved in some industrial action I could have done this for you Link to comment Share on other sites More sharing options...
ano Posted May 15, 2011 Author Report Share Posted May 15, 2011 I know a lot of people that could do the job, even for free. However it is impossible to get Aluminium T6 pipe on the island. Since nobody does ali on the site, I have no choice but search the web. Worst case scenario, keep it local and get a polished stainless steel induction pipe instead Thank you all for your input Link to comment Share on other sites More sharing options...
Recommended Posts