Jump to content

adampat84

Lapsed Club Members
  • Posts

    83
  • Joined

  • Last visited

Posts posted by adampat84

  1. I presume you are not using standard front door speakers, as if they are by putting the on an amp may just blow them up.. However hopefully the info below will help.

    you can get single amps that have separate channels.

    you headunit should have preamp outputs some time single set (two connector) some time double (4 connectors), you can tell this by looking at the back of your head unit. you will have sets of outputs (1 red and 1 white = 1 channel) . one is left and one is right.

    If you on;y have one set you can buy adaptors that plug onto the end of the phono cable to convert to run extra channels.

    (apologies if it all seem unclear, will make more sense if you look at the back of the Headunit)

  2. Torque's a good app and is worth paying for!!

    I have been using it for one and a half years and has helped me fix several cars!!

    If everyone used pirate downloads for these apps that cost hardly anything in the first place it will end up costing us all more!!

    :nono:

  3. Ring spanner first after plenty of WD40.. if fails as said above 13mm socket + heat and hammer it on good'n proper..

    Though you will require a new bolt after..

    Good Luck!!

    open ended spanned on tight nuts is never recommended..

    No matter how strong the spanner is they will still distort slightly allowing room for slippage.

    The reason bolts have so many sides is to evenly distribute the pressure..

    Think you may need a blow torch don't think a hair dryer is gonna cut it..

    Best 'O' Luck

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.