[Anyone on 235/45/17s?]

I run 225 45 17 which is already balloon like according to some (all though I like it ..) 235 will give an extra side wall height of 0,9 cm in total, 0,45 cm per side.

[What came in the Post Today?]

They are both oem from the GT86, red and normal edition. Bought them second handed

[What came in the Post Today?]

I'm having a knob addiction...

[Rubber exhaust mount, Specific or Universal]

You can just use an universal one. I also have universal ones on my TTE exhaust, just make sure you get small/short ones, otherwise the exhaust will hang to low.

[Eating Headlight Bulbs]

Yes there is a whole thread on that one. My previous Celica was eating bulbs too. Switched to HID and never had a single problem

[HID Headlights - Everything you need to know // Legalities of HID's covered.]

They fit multiple cars (the h7 bulb holders). Just make sure you have the correct design:

http://www.ebay.co.uk/itm/Mazda-3-5-6-MX-5-CX-7-H7-Xenon-HID-Conversion-Bulb-Holder-Headlight-Base-Adaptor-/390950921246?hash=item5b067da41e:g:BSgAAOSw3ydVg8yW

http://www.ebay.co.uk/itm/Toyota-Avensis-Corolla-Celica-H7-HID-Conversion-Kit-Bulb-Holders-Adaptors-/291421534331?hash=item43da13b87b:g:1kAAAOSweW5VG-nP

[celica GT vs GT86]

I drove a GT86 when it was released in 2012. I really missed the lift and the car felt a bit slow. I did love the handeling of the car. My next car will be a GT86, but one with a TRD or Aero kit and with a bit more power. I read great things on remapping and running EU98 (this enables full benefit of a new intake and exhaust system). 0-60 in 5.8 sec which you will never reach with a slightly modded Celica GT / TS .

[Removing a small ding]

Don't do it, when you make it worse you are screwed. Paintless dent repair should not cost much.

[Tyre size for 17x7.5 et37]

My old set was 215 45 17

I'm now running 225 45 17 for a wider and more beefy look, fills the wheel gap much better too (the car was also dropped an extra cm on the picture) and it will give the same effect as a 5mm spacer all around

[Cracked/broken TRD valance]

Assuming it's a fiberglass replica, let someone fix that and make the exhaust hole flush (because I see you run a TTE exhaust)

[MTEC discs,who's using them?]

I had Mtec grooved black coated ones all around on my previous Celica with Black Diamond pads which I loved. On my current Celica I have the same discs with Mintex pads. I find the pads very dusty.

[Rays Customer Feedback]

Fitted a Rays TRD Valance and Sports M hood scoop

The Valance has the exhaust cut-off blanked. Ray made sure the valance would not warp during this process. Needless to say, it fits perfect.

Also have the Sports M scoop fitted. I skimmed it with a layer of filler to get it perfectly flat, didn't had any bubbling issues afterwards

Very satisfied with the service, fast shipping and quality of the products. A++