Jump to content

Aftershock

Lapsed Club Members
  • Posts

    1,063
  • Joined

  • Last visited

Posts posted by Aftershock

  1. Hi i have the chance to get hold of a Gen 7 with a knackered engine cheap as there are a few parts from it i want, but does anybody know how much i would get for it once i take som bits off if i scrapped it? Probably take bumpers off lights off and seats out.

    Also is it better to take it into the scrappy whole, cut it into bits or just let them come pick it up.

    Will obviously offer any parts anybody wants off it before hand but cant really keep it around to break it properly.

    Thanks for any advice

  2. A quick update, i managed to fix the hose back onto the radiator last night and was up at 6 to bleed the coolant before work. Im not 100% sure all the air is out yet but it seems to be ok, i've topped up the coolant again and the temp guage was pretty steady.

    I'm picking up another radiator after work from euro car parts and some more coolant. As long as it doesnt loose any coolant and temp stays steady on the way down i will be fine, if not then i'll have a spare radiator with me to swap in :)

  3. I've just packed all my stuff into the car for Rising sun as im leaving tomorrow straight after work, checked the oil, which needed a top up, checked the coolant which also needed a top up so undid the coolant tank, went to un clip the hoses soi can lift it onto the bonnet latch and all the coolant started running out from under the car, it was like watching my car bleed to death.

    I though i had pulled the hose of from the top of the radiator, however the plastic piece the hose goes on to has broken, the bit left in the pipe disintegrated.

    No where to get a radiator at this time of night, managed to put in a plastic insert and currently waiting on the araldite to set before putting it back together. This couldn't have happened at a worse time, well apart from driving down the motorway i suppose.

    I just hope this works so i can get to RS, at least if i get there RAC can get me home. :(

  4. If your fitting it yourself David i'd definitely take the wheels off and consider the front bumper off aswell, surely there will be some volunteers on Sunday :P

    saw Grey Racer with one of these (or similar) at Blyton, want a gen 6 version!!!!!

    Yes this is the exact same, he picked mine up from lee on his way home. There was a group buy a while ago for gen 6 ones, they should be easier to come by than 7 ones lol

  5. I've had them on mine for over 2 years, just have to make sure and check them after changing a wheel and driving a bit, otherwise had no problems, i dont think i checked for a while last time, hence the missing wheel nut. So its only toyota that make the flat seated ones needed for OEM wheels?

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.