[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

Not at the moment

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

Ill send you a pm

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

No if you want stock the stay stock

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

another busy day

GT4 Diff hanger bush's

Subframe bush kit with race spec hanger bush's and ally diff mount

and as full st185 engine mount kit of to Holland

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

yes al li have done now is used a tube with a smaller hole, as I have told you be for slybunda it make now difference to how the mount fits or works,allso it only about 3mm smaller. just happens to be the tube I have in stock

few more decats picked up from the welder to day

few gear bush kits and ST205 arm alignment tubes off in the post

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

Gen7 Front mount off in the post

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

so was asked for a blue diff mount and that what they got

ST185 Throttle body plate

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

few more parts off in the post

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

for more parts off in the post

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

few more parts all ready for shipping out

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

Again I don't feel it's worth it for the out lay cost of the subframe and bush's people won't pay the money for it. I know the GT4-PLAY all ready done most of this and has had a set in stock for over a years and now 1 has asked or bought any parts of the rear subframe. This is all so why I have not looked into it. I'm. Sorry to say but most of the gen7 tend to be all looks over performance

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

not something iv looked in to or been asked for, but I do offer the front wish bones in poly ready to fit. iv yet to have any 1 ask for the poly bush's for the rear subframe for a gen7, and you would be looking at close to £400 just for all the poly bush's to rebuild it witch most people will not pay

http://www.celica-club.co.uk/forum/index.php?/topic/160688-gen7-poly-front-wish-bones/

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

few bit of the New Zealand

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

few more orders ready to go out

[Gen7 gear linkage bushes poly vs brass]

good idea

[Gen7 gear linkage bushes poly vs brass]

hmm they do look the same but dunno if the measurements are different. they are very easy to get to on the aygo so i guess i could take them off and measure

if you can have a look at let me know if they are the same that be great as I can then make them for the aygo

[Gen7 gear linkage bushes poly vs brass]

that's why I make them out of Polyoxymethylene Delrin

[Gen7 gear linkage bushes poly vs brass]

nope there just steel shafts on the gear linkage, I seen then do this and rip the rubber off the brass tube that had corroded on to the steel shaft

This is what can happen with the oem bushes with the Brass inserts, it can corrode on to the steel shaft,

[Gen7 gear linkage bushes poly vs brass]

the problem with brass its to hard so no give or flex in it, witch then make is wears cos its a soft metal if you know what I mean

[Gen7 gear linkage bushes poly vs brass]

the other thing your find with the brass bush's they will all so oval and can corrode onto the steel shaft and get stuck like the oem bush's do, were as the Actal-Delrin poly bush's I do will not corrode and even though they are solid they still have 30% flex in them, so you get the best of both worlds, if you have a look on my post for gear bush's you will see the brass part of the bush stuck to the steel shaft

stock bush's with the brass centre

http://www.celica-club.co.uk/forum/index.php?/topic/166180-new-gen4-5-6-7-race-gear-shift-bushes/

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

busy weekend getting a few orders sorted, for shipping to Austria

and a rear subframe stripped powder coated and rebuilt ready for collection

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

Hi mate the poly mount is covered by at 2 year road use warranty but the paint work is not. They do get rusty over time rusty over time. You should see the state of some of the mounts and parts I receive from people, some mounts I can not reuse they are that bad

[GEN 4-5-6-7 poly ENGINE MOUNTS and GT4 REAR DIFF MOUNT]

GT4 Diff Hanger Bush's ready to shipped to Norway

and this full set to Switzerland