-
Posts
3,681 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Events
Gallery
Club Shop
Collections
Posts posted by sadlebag
-
-
sweeeeeet car dude
-
Bek might
-
I'll keep you posted on date/time.
-
I think sir you have a deal! I'll be going to Surrey some time after the 22nd so could pick it around then?
-
You not keeping it?
-
Can you still do the front undertray that had the built in diffuser?
-
Mr2 would be a good laugh!
-
ha thats excellant, higher than most rally cars to!!
-
my car won't count but i have an idea which ill do tomorrow!
-
New challenge then matt
-
You will probably need a second person and hold it steady with a crow bar!
-
Speak to insanity74 or Nial as he is called. Sure he did this with moulding of the gt4 bumper to a stock gen 6
-
yeah old stock/old design, i think there is a new design out now which is why they are cheap. still a good tyre though.
I run maxis z1drift tyres, yes they are designed for drifting but i have found they have amazing grip! A little on the soft side but more than fine for me
-
You'll be surprised at how many people don't do this, has just come on after you bled them? Make sure the float is floating and the switch is off the stop, they can get stuck on the odd occasion
-
Too up your fluid, should solve if
-
Excellent cheers guys
-
Alright what about the boost controller?
-
Does anyone know if you leave the battery disconnected for to long, does the ecu forget the map?
-
Wise band sensor wise that can be cleaned with petrol, cat wise I'm not sure you could just go de cat and be done with it.
-
Problem i had was with the hot summer we had last year, the black attracted all the heat, melted the glue and then they started shrinking. from what i've seen any other colour is fine. Good example on splinters car, his black bits of his graphics have started shrinking but all the others are fine.
-
Yeah mooks graphics are good, I just wouldn't go for black.
-
Yeah mentioned that the glue as I had a fair bit of some of them lifting up after a couple of weeks and recommended reheating them up to reset the glue as you were.
-
I think the colour of them makes a big difference, the black just attracts all the heat from the sun, warms up the glue too much and then they get destroyed whilst driving. All the roof ones have shrunk and cracked.
I should add it was me who fitted them, so perhaps it's my fault over the graphics but who knows.
-
Well my GT4 is back on the road and first review of the polly engine mounts is they are awesome. Engine feels more responsive only trade off is a slightly higher vibration at idle when hot however mines idling about 650 at the moment at about 800 its not noticeable. So id recommend them to anyone
Sent from my GT-I9100 using Tapatalk
Agreed
- 1
Apexi ecu question
in General Celica Discussion
Posted
About to bite the bullet and fit the supercharger to my car next weekend, the apexi ecu hasn't been plugged in or powered up in about a year, will the ECU still hold the last map put on it?