Black Knight Posted January 31, 2012 Report Share Posted January 31, 2012 I remember reading a very long time ago a simple guide to stopping the clock from dimming when you turn your lights on in a UK Gen 6. If memory serves you just cut one of the wires at the back, but which one? Any one remember/know or can point me back to the original guide much appreciated. Link to comment Share on other sites More sharing options...
AlexH Posted January 31, 2012 Report Share Posted January 31, 2012 Green one. Third one in, I think. Link to comment Share on other sites More sharing options...
Black Knight Posted January 31, 2012 Author Report Share Posted January 31, 2012 Think!!! No offence mate but I’d like a more definite answer than that before I start cutting wires Any one else want to support or oppose the cutting of the Green wire? Link to comment Share on other sites More sharing options...
Goldspeed. Posted January 31, 2012 Report Share Posted January 31, 2012 lol.... don't cut the red one or it will explode.! Link to comment Share on other sites More sharing options...
AlexH Posted January 31, 2012 Report Share Posted January 31, 2012 lol - it's definitely the green one. The "I think" was only about whether it's third one in or not. It's the only green one! I haven't got my dash apart at the minute to tell you which position it's in...but it's definitely the green one. I suppose whether it's the third or second one in depends on whether you're looking from the front or back!!! I think it's actually labelled something like "Dim" or "Att" too. But it's DEFFO the green one!! Link to comment Share on other sites More sharing options...
Black Knight Posted January 31, 2012 Author Report Share Posted January 31, 2012 And the man comes back with multiple ‘definites’ :lol: Fair do though mate Not intending to do it straight away but next time I have the centre console out will definitely be looking to put a stop to this annoying little feature. Just fitted one of Spree’s red filters in it and when it dims it now looks REALLY dim!!! Link to comment Share on other sites More sharing options...
AlexH Posted January 31, 2012 Report Share Posted January 31, 2012 (edited) Hey, you asked! lol. I can't find the thread on here, but one at the end of this http://www.celicahobby.com/forums/ubbthreads.php/ubb/showflat/Number/1870216506/site_id/1 shows the wire and the plug from the back of the clock. I did the same - fitted one of Spree's red LED kits (which looks great) but had to snip the wire to keep the clock lit cos the red was dimmer than the manky green! Good luck with it mate. Edited January 31, 2012 by AlexH Link to comment Share on other sites More sharing options...
Recommended Posts