tlee05 Posted March 30, 2011 Report Share Posted March 30, 2011 I have a TTE Coilover kit and was told that my lower suspension arm bushes have worn out, Does anyone know any good sites to get new suspension arm bushes? I'm guessing I will need to take the current bushes out to measure them and go from there? Link to comment Share on other sites More sharing options...
CW Racing Posted March 31, 2011 Report Share Posted March 31, 2011 Fcm motorsport on here mate. Might be able to help Link to comment Share on other sites More sharing options...
bigstring Posted March 31, 2011 Report Share Posted March 31, 2011 Fcm motorsport again, cracking Link to comment Share on other sites More sharing options...
sonic Posted March 31, 2011 Report Share Posted March 31, 2011 fensports , or the chap on ebay from poland (club member) Link to comment Share on other sites More sharing options...
CW Racing Posted March 31, 2011 Report Share Posted March 31, 2011 Hey bigstring, my Fcm bushes worked excellent at Rockingham over the weekend. Very sharp handling. Link to comment Share on other sites More sharing options...
bigstring Posted March 31, 2011 Report Share Posted March 31, 2011 Hey bigstring, my Fcm bushes worked excellent at Rockingham over the weekend. Very sharp handling. Mine work super duper at Castle Combe twice a day, my drive to work and back, does make a tone of difference.. Link to comment Share on other sites More sharing options...
devnet Posted March 31, 2011 Report Share Posted March 31, 2011 i might be up for a set to but how hard is ti to change them? Link to comment Share on other sites More sharing options...
bigstring Posted March 31, 2011 Report Share Posted March 31, 2011 Ask FMC or in the Gen7 bit as there was someone with the complete kit fitted Link to comment Share on other sites More sharing options...
tlee05 Posted April 2, 2011 Author Report Share Posted April 2, 2011 Awesome guys, thanks for the help. Link to comment Share on other sites More sharing options...
tlee05 Posted April 2, 2011 Author Report Share Posted April 2, 2011 (edited) I'm not going to go crazy and do the whole kit I'll be there for hours on end. I'll drop FMC a email I did also look at powerflex too, this is one of the bushes that I was told had excessive wear: lower suspension bush needs to be placed which is a 35mm hole measured it today, what's the standard Toyota size?. Also if anyone knows what this bush is called it would be really handy (circled red), as I need to order two of these. Edited April 2, 2011 by tlee05 Link to comment Share on other sites More sharing options...
Recommended Posts