Key repogramming G7
CELICA KEY PROGRAMMING
1 open door, take key out...
2 insert and remove key from ignition 2 times
3 close and open driver's door 2 times
4 insert and remove key from ignition
5 close and open driver's door 2 times
6 insert key into ignition
7 close door
8 turn ignition from 'lock' to 'on' and back to 'lock'
if you do step #8
- 1 time it's for add mode
- 2 times for rewrite mode
- 3 times for confirmation mode
- 4 times for prohibition mode
9 remove key
10 then door lock will cycle 'lock' and 'unlock' a number of times corresponding to your key cycles in step #8
11 press lock and unlock button together for 1 ~ 1.5 sec then release
12 then within 3 sec press lock button for 1 sec then release
13 if you did correctly door lock will cycle once...
if wrong, twice... then do it over...
For Imobiliser encoding if previous does not work:
Simultaneously depress and then release BRAKE & ACCELERATOR Pedal 1 time Insert existing master key into ignition and switch to ON Within 15 secs depress & release ACCELERATOR pedal 5 times (take your time) Within 20 secs depress & release BRAKE pedal 6 times (again take your time) Remove Key Within 10 secs insert new key into ignition and switch to ON Within 10 sces depress and release ACELERATOR pedal 1 time After 60-80 secs Security light will stop flashing, and new key is registered Take out key and depress and release BRAKE peadal 1 time Key should now start car