JDM Rear Light Conversion

ok a couple of members have mentioned that it would be worth while me creating a wiki for the JDM light conversion... here it is

this works for both the GT and GT4 unsure of the ST wiring designations

Shopping List:-

• 2x 12/24v 3w diodes
• Soldering Iron and Solder
• Heat Shrink Sleeving
• 2x Stop/Tail Bulb holders from Mr T (or modify your existing bulb holders to accomodate a twin pole bulb)(ill have a look for some part numbers when i can get my other computer sorted)
• side cutters
• wire strippers

Method:-

• remove the rear and drivers side boot casings
• this will reveal the wiring harness for the rear light clusters than runs along the rear wing. you will see that the harness goes through the a-frame above the suspention turret
• remove both multiplugs and on the larger one, seperate the solid red and the green/white wires from the rest of the loom and cut both of them.
• wire in your diodes like this

Error creating thumbnail: Unable to save thumbnail to destination

• once youve done that refit the wiring and put the boot casings back in

• remove rear light clusters
• remove all the bulb holders to enable room to work put you clusters in a safe place
• cut the fog bulb holder off and wire in your new one ensuring that the fog feed is feeding the 21w side of your bulb

-- UNFINISHED I'LL COMPLETE IT SOON --

Stain