Difference between revisions of "Gen6 oil change"
From Wiki
m (added return link) |
|||
| Line 12: | Line 12: | ||
* Turn off (wait for 5 mins for oil to settle) | * Turn off (wait for 5 mins for oil to settle) | ||
* Check level and top up until oil is at max mark on dipstick | * Check level and top up until oil is at max mark on dipstick | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ---- | ||
| + | |||
| + | [[gen6 servicing|Back to Gen 6 Routine Servicing]] | ||
| + | |||
| + | [[Generation_6|Back to Gen 6 Maintenance menu]] | ||
Latest revision as of 09:37, 9 January 2008
Engine Oil/Filter Replacement:
- Run engine until warm (50 C)
- Remove sump bung and leave to drain for 30 mins
- Punch hole in bottom of Filter, using a screwdriver or punch, to drain oil
- Remove oil filter (Lower O/S/F of engine)
- Fit new oil filter
- Replace sump bung and tighten to 25 Nm (18.4 Lb-Ft)
- Remove oil filler cap (O/S/R of rocker cover)
- Fill with 4 litres of engine oil & replace oil filler cap
- Run engine
- Turn off (wait for 5 mins for oil to settle)
- Check level and top up until oil is at max mark on dipstick
