Difference between revisions of "Gen6 spark plugs"

From Wiki
Jump to: navigation, search
m (added return links)
 
(One intermediate revision by the same user not shown)
Line 10: Line 10:
  
 
Recommended NGK plugs for 3S-GE = '''BKR6EP'''-82215
 
Recommended NGK plugs for 3S-GE = '''BKR6EP'''-82215
 +
 +
Toyota P/N = 90919-01180
  
 
Gap is preset
 
Gap is preset
  
HT Lead Resistance: <25K Ohm PER Lead+999
+
HT Lead Resistance: <25K Ohm PER Lead
  
  

Latest revision as of 20:35, 27 January 2008

Spark Plug Replacement:

  • Remove HT leads from sparkplugs located on the rear side of the engine noting cylinder assignment.
  • Remove plugs from cylinder head
  • Check gap of new plugs using feeler gauge (NGK Spec: 0.8mm although this should be preset)
  • If adjustment is required use a soft faced mallet to adjust. Don’t ever leave feeler gauge in whilst adjusting gap.
  • Smear a small amount of copper grease or molybdenum grease around the threads, avoiding leading 3 threads.
  • Fit plugs into cylinder head and torque to 18Nm (13.3 lb-ft)
  • Refit HT Leads

Recommended NGK plugs for 3S-GE = BKR6EP-82215

Toyota P/N = 90919-01180

Gap is preset

HT Lead Resistance: <25K Ohm PER Lead




Back to Gen 6 Routine Servicing

Back to Gen 6 Maintenance menu