Import of Gen 7 17" wheels

[snsb]

Hi

I am in contact with a manufacturer of wheels , specifically 17" , for Gen 7 Celica. Can someone please give me the complete specification for them to be fitted without modification.

The wheels I will initially import will be chrome finish.

Thanks John.

[Old Red Celica]

You could have the offsets changed so you can fit without using spacers, if that's your thing.

[snsb]

Yes I would like the wheels to be fitted without spacers. I am a bit naive, the spec they have given me is:- 17x10.5j ET10 PCD5-100/114.3 CB73.1

Would this be suitable?

[Jim881]

You will need 5x100 bit the offset os your choice really, as red said.

 

Specs of my JRs running extended studs and 10mm spacers on the rear.

 

Diameter:

17"

Width:

7.5"

PCD:

5 x 100/114.3

Offset / ET:

35

Centre Bore:

73.10mm

 

Can be run without spacers though. 

Edited 12 September 2025 by Jim881

[Old Red Celica]

I thought CB was 54.1mm,   5x100 PCD, ET is 38mm as standard

[snsb]

Thanks Jim881 and Old Red Celica. Very helpful information.

[Old Red Celica]

You may wish to compare tyre sizes.

http://www.tyresave....k/tyresiz2.html

So you can work out the most cost effective tyre size.

[ams]

73,1 is a standard aftermarket centre bore that you can get spigot rings down to 54.1 for., 

 

10.5 is a very wide wheel 

[snsb]

Thanks for your comments.Would 10.5 fit ok ?

[Old Red Celica]

Have you measured up at all?

[snsb]

No to be honest I haven't!

[pi_r_2]

5 hours ago, snsb said:

Yes I would like the wheels to be fitted without spacers. I am a bit naive, the spec they have given me is:- 17x10.5j ET10 PCD5-100/114.3 CB73.1

Would this be suitable?

 

10.5 is for 265 to 295 tires, very large for a Celica !!!

 

This site is very useful for visualizing the difference between two configurations 

https://www.willtheyfit.com/

Edited 12 September 2025 by pi_r_2

[snsb]

Thanks. I will have to rethink!!!

[Old Red Celica]

I would question why you feel the need to go so wide. 

[snsb]

Yes I totally agree. On reflection I am revising my thoughts drastically going down to 7.5.

[Jim881]

20 hours ago, Old Red Celica said:

I thought CB was 54.1mm,   5x100 PCD, ET is 38mm as standard

Well spotted mate, forgot to mention the spigot ring allowing me to fit them.

 

Spigot Ring 73.1 - 54.1mm (Plastic)

[slybunda]

7.5j would work well with 225 tyres which I find to be cheaper than 215

[digs]

On 12/09/2025 at 16:33, pi_r_2 said:

 

10.5 is for 265 to 295 tires, very large for a Celica !!!

 

This site is very useful for visualizing the difference between two configurations 

https://www.willtheyfit.com/

 

 

have used that site many times, it is really useful for checking!

[snsb]

Thanks Digs

Appreciate your advice, will have a detailed look later.

John.

[Old Red Celica]

At one point I was running 235/40-16 tyres on my SR Momo rims, with only a little bit of rubbing af full lock, when loaded up.