CiaranLeeman Posted August 29, 2018 Report Share Posted August 29, 2018 Morning everyone I seem to be in a spot of bother. My passenger headlight blew the other day so I fitted a new one from Halfrauds and it's pointing really low (the old one didn't) and as far as i can tell it's all fitted correctly. I saw that there is a sprocket that if you turn it will move the aim up and down but after turning it 2 or 3 times it made no difference whatsoever. Any help?! Link to comment Share on other sites More sharing options...
G.Lewarne Posted August 29, 2018 Report Share Posted August 29, 2018 bulb is in wonky. Its quite tricky to seat them correctly in the holder if you don't take the whole headlight out - but it is possible Link to comment Share on other sites More sharing options...
Cravo Posted August 29, 2018 Report Share Posted August 29, 2018 The adjuster bolt needs turning about 20 times mate. Line it up against a wall or garage from 5-10 feet away and you will see it moving. It is awkward and slow. Link to comment Share on other sites More sharing options...
G.Lewarne Posted August 29, 2018 Report Share Posted August 29, 2018 2 hours ago, Cravo said: The adjuster bolt needs turning about 20 times mate. Line it up against a wall or garage from 5-10 feet away and you will see it moving. It is awkward and slow. it shouldn't be that far out with just a bulb change. I did mine wrong the first time and I had one super high, reseated the bulb and back to normal Link to comment Share on other sites More sharing options...
Recommended Posts